Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,214Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: SERIGHT'S ACE HARDWARE

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of SERIGHT'S ACE HARDWARE in 14236 IDAHO 41, RATHDRUM, ID 83858 (NAICS 444130). OSHA activity number 346478324.

Watch Seright'S ACE Hardware — free Get an email when a new federal OSHA severe-injury report for Seright'S ACE Hardware is published. One employer, no account, unsubscribe in one click.
Site address
14236 IDAHO 41
City
RATHDRUM
State
ID
ZIP
83858
Mailing
14236 IDAHO 41, RATHDRUM, ID 83858
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
444130
Employees
25
Ownership type
A

6 citations on file for this inspection.

5(a)(1)

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $7813.00 · Current $5200.00 Reduced
OSH ACT of 1970 Section (5)(a)(1):The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees.  a) On or about February 2, 2023 and times prior thereto, employees were exposed to crushed-by hazards while operating a powered industrial truck without the use of a seat belt.  NOTE: Abatement certification is required for this item.
Recent events (2)
  • — I (S) $5200
  • — Z (S) $7813

1910.178 L01 II

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $6250.00 · Current $0.00 Reduced
29 CFR  1910.178(l)(1)(ii):The employer did not ensure that each operator had successfully completed the training required by paragraph (l), except as permitted by paragraph (l)(5), prior to permitting an employee to operate a powered industrial truck  a) On or about February 2, 2023 and times prior thereto, employees operate a Crown pallet jack forklift to move material and load and unload trucks before receiving training.  NOTE: Abatement certification is required for this item.
Recent events (2)
  • — I (S) $0
  • — Z (S) $6250

1910.178 L03 I M

Serious Gravity 5 2 instances 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1910.178(l)(3)(i)(M):The employer did not review the operating instructions, warnings, or precautions listed in the operator's manual for the types of vehicle that the employee is being trained to operate:  a) On or about February 2, 2023 and times prior thereto, employees had not received training on the operators manual for the Toyota propane lift.  b) On or about February 2, 2023 and times prior thereto, employees had not received training on the operators manual for the Crown electric pallet jack.  NOTE: Abatement certification is required for this item.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.178 L04 I

Serious Gravity 5 2 instances 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1910.178(l)(4)(i): An evaluation of each powered industrial truck operator's performance was not conducted at least once every three years.  a) On or about February 2, 2023 and times prior thereto, employees had not received refresher training for the Crown electric pallet jack or Toyota propane lift.   b) On or about February 2, 2023 and times prior thereto, employees had not received refresher training for the Toyota propane lift.   NOTE: Abatement certification is required for this item.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.151 C

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $6250.00 · Current $4000.00 Reduced
29 CFR  1910.151(c):Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use  a) On or about February 2, 2023 and times prior thereto, employees were not provided a means to flush eyes if contact is made with corrosive material while refilling electrolyte fluid in forklift battery.  NOTE: Abatement certification is required for this item.
Recent events (2)
  • — I (S) $4000
  • — Z (S) $6250

1910.212 A01

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $7813.00 · Current $5200.00 Reduced
29 CFR  1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  a) On or about February 2, 2022 and times prior thereto, employees use a Craftsman single bevel miter saw without a guard to make cuts on various types on material.  NOTE: Abatement certification is required for this item.
Recent events (2)
  • — I (S) $5200
  • — Z (S) $7813

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346478324.