BATON ROUGE, LA —
OSHA Inspection: DRILLCO CUTTING TOOLS INC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of DRILLCO CUTTING TOOLS INC in 13011 SOUTH CHOCTAW DRIVE, BATON ROUGE, LA 70815 (NAICS 423840). OSHA activity number 346541162.
Where did this inspection happen?
- Establishment
- DRILLCO CUTTING TOOLS INC
- Site address
- 13011 SOUTH CHOCTAW DRIVE
- City
- BATON ROUGE
- State
- LA
- ZIP
- 70815
- Mailing
- 13011 SOUTH CHOCTAW DRIVE, BATON ROUGE, LA 70815
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 423840
- Employees
- 30
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.133 A01
- Issued
- Abate by
- Penalty
- Initial $6250.00 · Current $5247.00 Reduced
General-duty citation text
29 CFR 1910.133(a)(1): Protective eye equipment was not required where there was a reasonable probability of injury that could be prevented by such equipment: a) On or about March 2, 2023, in the warehouse area west side, employees utilize a Ryobi BT3000 table saw (S#705034) to make shipping boxes without wearing protective eyewear. b) On or about March 2, 2023, in the CNC machining area south west side, employees utilize a DeWalt Dw758 bench grinder (S# unknown) to grind rust of shanks without wearing protective eyewear. c) On or about March 2, 2023, in the CNC machining area north east side, employees utilize a Top Work Cm-2 tool sharpener (S# unknown) to sharpen bits without wearing protective eyewear.
Recent events (2)
- — I (S) $5247
- — Z (S) $6250
1910.213 C01
- Issued
- Abate by
- Penalty
- Initial $6250.00 · Current $5500.00 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: a) On or about March 2, 2023, in the warehouse area west side, employees utilize a Ryobi BT3000 table saw (S#705034) to make shipping containers without a hood guard
Recent events (2)
- — I (S) $5500
- — Z (S) $6250
1910.213 C02
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.213(c)(2): Hand-fed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator: a) On or about March 2, 2023, in the warehouse area west side, employees utilize a Ryobi BT3000 table saw (S#705034) to make shipping boxes without an appropriate riving knife or spreader
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 C03
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: a) On or about March 2, 2023, in the warehouse area west side, employees utilize a Ryobi BT3000 table saw (S#705034)to make shipping boxes without an appropriate riving kick back fingers
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.242 B
- Issued
- Abate by
- Penalty
- Initial $9376.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: a) On or about March 2, 2023, in the Shop, the employer did not ensure that employees used compressed air that measured below 30 p.s.i. for cleaning self and work areas.
Recent events (2)
- — I (S) $0
- — Z (S) $9376
1910.305 G02 III
- Issued
- Abate by
- Penalty
- Initial $9376.00 · Current $9376.00
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws a) On or about March 2, 2023, by the bay doors in the warehouse employees were permitted to use the coke vending machine with its power cord exhibiting damaged strain relief.
Recent events (2)
- — I (S) $9376
- — Z (S) $9376
1910.178 L06
- Issued
- Abate by
- Penalty
- Initial $877.00 · Current $877.00
General-duty citation text
29 CFR 1910.178(l)(6): The certification did not include the name of the operator, the date of the training, the date of the evaluation, and the identity of the person(s) performing the training or evaluation: a) On or about March 2, 2023 parking lot next to the warehouse Toyota Forklift Truck (S/N# 82998) without certification that operator training had been conducted.
Recent events (2)
- — I (O) $877
- — Z (O) $877
More inspections at DRILLCO CUTTING TOOLS INC
BATON ROUGE, LA—2024-10-22 00:00:00
DRILLCO CUTTING TOOLS INC
View DRILLCO CUTTING TOOLS INC's full OSHA safety record →
More inspections in this industry (NAICS 423840)
LIVERMORE, CA—2026-07-16
RJMS CORPORATION
WICHITA, KS—2026-07-08
IBT, INC
HOUSTON, TX—2026-06-24
FASGO INC.
INDEPENDENCE, KY—2026-06-18
69237 - TRISTATE VALVES - CONTROLS INC
CARLISLE, PA—2026-06-12
APPLIED INDUSTRIAL TECHNOLOGIES
More inspections in LA
LAFAYETTE, LA—2026-07-15
GULLEY'S WELDING & STEEL ERECTORS, INC.
LAFAYETTE, LA—2026-07-15
ACORREA COMPANY, LLC
LAFAYETTE, LA—2026-07-14
GULF COAST WOODWORK, L.L.C.
BELLE ROSE, LA—2026-07-14
OXYCHEM
AMELIA, LA—2026-07-10
CONRAD SHIPYARD, LLC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346541162.