OSHA Inspection: GT MECHANICAL, INC.

Issued

2023-06-06 00:00:00

Penalty

Initial $6250.00 · Current $4375.00 Reduced

General-duty citation text

29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets:  a) On April 7, 2023, employees were exposed to struck-by hazards while engaged in hoisting operations.  No abatement certification or documentation is required for this item.

Issued

2023-06-06 00:00:00

Penalty

Initial $10938.00 · Current $7657.00 Reduced

General-duty citation text

29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems:   a) On or about April 7, 2023, employees engaged in rooftop unit replacement were not protected from fall hazards of over 25 feet to the ground, while working along unprotected edge of the roof.  No abatement certification or documentation is required for this item.

Issued

2023-06-06 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1926.501(b)(3): Each employee in a hoist area was not protected from falling 6 feet (1.8m) or more to lower levels by guardrail systems or personal fall arrest systems:  a) On April 7, 2023, Employees were exposed to the hazard of falling approximately 25 feet to the ground while working in the hoist area.  No abatement certification or documentation is required for this item.