OSHA Inspection: PEDRO CESAREO DBA CESAREO CONSTRUCTION

Issued

2023-08-14 00:00:00

Abate by

2023-09-08 00:00:00

Penalty

Initial $376.00 · Current $376.00

General-duty citation text

29 CFR  1903.19(c)(1):The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:  Citation?Number????????????????Item Number????????????????????????Abatement Date  01????????????????????????????????????                 01-a???????????????????????????????????               07/05/2023 01????????????????????????????????????                 01-b???????????????????????????                    07/05/2023 01????????????????????????????????????                 03-c????????????????????????????????????               07/05/2023 01????????????????????????????????????                 02??????????????????????????????????    ?                07/05/2023   In?accordance with?29 CFR?1903.19(c), abatement?certification is?required for?this violation?(using the?CERTIFICATION OF?CORRECTIVE ACTION?WORKSHEET).

Issued

2023-06-07 00:00:00

Abate by

2023-07-05 00:00:00

Penalty

Initial $4688.00 · Current $4688.00

Hazardous substances 9000

General-duty citation text

29 CFR  1926.1153(c)(1):   For each employee engaged in a task identified on Table 1, the employer did not fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1, unless the employer assesses and limits the exposure of the employee to respirable crystalline silica in accordance with paragraph (d) of this section..  a) On or about April 20,2023 at 1823 W. Greenleaf Ave, Chicago IL, the employer did not fully and properly implemented engineering controls and work practices, as specified in Table 1 when using a Dewalt (DWE402) heavy duty small angle grinder, to tuckpoint columns containing up to 20 % of respirable crystalline silica (Quartz) without equipping the tool with a water delivery system that supplies a continuous stream or spray of water at the point of impact or a tool equipped with a commercially available shroud and dust collection system.   In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

2023-06-07 00:00:00

Abate by

2023-07-05 00:00:00

Penalty

Initial $0.00 · Current $0.00

Hazardous substances 9000

General-duty citation text

29 CFR  1926.1153(d)(2)(i): The employer did not assess the exposure of each employee who was or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2)(ii) or the scheduled monitoring option in paragraph (d)(2)(iii) of this section:  a) On or about April 20,2023  at  1823  W. Greenleaf Ave, Chicago IL, the employer did not assess the exposure of employee(s) exposed to respirable crystalline silica when operating a Dewalt (DWE402) heavy duty small angle grinder, to tuckpoint columns containing up to  20% of respirable crystalline silica (Quartz).   In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

2023-06-07 00:00:00

Abate by

2023-07-05 00:00:00

Penalty

Initial $0.00 · Current $0.00

Hazardous substances 9000

General-duty citation text

29 CFR  1926.1153(i)(1): The employer did not ensure that each employee is trained in accordance with the provisions of HCS and paragraph (i)(2) of this section:  a) On or about April 20,2023  at  1823 W. Greenleaf Ave, Chicago IL, the employer did not ensure that each employee exposed to crystalline silica was trained on the following: health hazards, specific tasks where exposure could occur, protective measures including respiratory protection, work practices, and engineering controls, the identity of the competent person, and the purpose of the medical surveillance program.  The employees were exposed to dust containing  20 % of respirable crystalline silica (Quartz) when tuckpointing the porch of a residential building.   In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

2023-06-07 00:00:00

Abate by

2023-07-05 00:00:00

Penalty

Initial $4688.00 · Current $4688.00

Hazardous substances 9000

General-duty citation text

29 CFR  1926.1153(e)(1): Where respiratory protection was required by this section, the employer did not provide each employee an appropriate respirator that complied with the requirements of this paragraph and 29 CFR 1910.134:  a) On or about April 20,2023  at  1823 W. Greenleaf Ave, Chicago IL, the employer did not provide each employee with an appropriate respirator, as specified in Table 1 when using a Dewalt (DWE402) heavy duty small angle grinder, to tuckpoint columns containing up to 20% of respirable crystalline silica (Quartz).   In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.