OSHA Inspection: BRENDA ROSIVEL VILLEDA

Issued

2023-08-07 00:00:00

Penalty

Initial $2679.00 · Current $0.00 Reduced

General-duty citation text

29 CFR  1926.102(a)(1):Employees did not use eye and face protection equipment when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents:  Worksite located at 1330 NW Tollison Road, Kansas City, Missouri- Employee was exposed to possible eye injury hazards while the employee was observed using a radial saw to cut siding and was not wearing any means of safety glasses.

Issued

2023-08-07 00:00:00

Abate by

2023-08-31 00:00:00

Penalty

Initial $4688.00 · Current $0.00 Reduced

General-duty citation text

29 CFR  1926.453(b)(2)(ix):Controls for the articulating and extensible boom platforms were not clearly marked to identify their function:  Worksite located 1330 NW Tollison Road, Kansas City, Missouri- Employee was exposed to a fall hazard while working in an aerial lift in which the controls of the lift were covered with paint and caulk, thus the controls were not legible.

Issued

2023-08-07 00:00:00

Penalty

Initial $4688.00 · Current $0.00 Reduced

General-duty citation text

29 CFR  1926.453(b)(2)(v):A safety belt or harness with lanyard attached to the boom or basket was not worn by employee working from an aerial lift:  Worksite located at 1330 NW Tollison Road, Kansas City, Missouri- Employee was exposed to a fall hazard while working in an aerial lift and had failed to connect a lanyard to the boom or basket of the lift.

Issued

2023-08-07 00:00:00

Abate by

2023-08-31 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1926.502(d)(21):Personal fall arrest systems were not inspected prior to each use for wear, damage, and other deterioration, and/or defective components were not removed from service:  Worksite located at 1330 NW Tollison Road, Kansas City, Missouri- An employee who was exposed to fall hazards and required to use personal fall arrest equipment, was using equipment that needed to be replaced due to the wear and deterioration of the equipment.