Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: CHATTANOOGA INDUSTRIAL MOTORS, INC.

Monitoring inspection · Health discipline

On , OSHA opened a monitoring health inspection of CHATTANOOGA INDUSTRIAL MOTORS, INC. in 6483 SLYGO ROAD, WILDWOOD, GA 30757 (NAICS 811310). OSHA activity number 346843584.

Watch Chattanooga Industrial Motors, INC. — free Get an email when a new federal OSHA severe-injury report for Chattanooga Industrial Motors, INC. is published. One employer, no account, unsubscribe in one click.
Site address
6483 SLYGO ROAD
City
WILDWOOD
State
GA
ZIP
30757
Mailing
PO BOX 264, WILDWOOD, GA 30757
Inspection type
Monitoring (D)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
811310
Employees
22
Ownership type
A

6 citations on file for this inspection.

1910.212 A03 II

Deleted Serious Gravity 5 4 instances 2 exposed
Issued
Abate by
Penalty
Initial $4554.00 · Current $0.00 Reduced
29 CFR  1910.212(a)(3)(ii):The  point of operation of machines whose operation exposed an employee to injury, was not guarded:  a)Mechanic Shop; On or about July 19, 2023 and at times prior, the employer exposed employees to amputation and puncture hazards, in that the drill press (Rockwell Delta) did not have a guard to protect employees while performing required mechanic job duties.  b)Oven Room; On or about July 19, 2023 and at times prior, the employer exposed employees to laceration hazards and eye injuries, in that the large cut-off saw did not have a guard to protect employees when cutting the end of a motor off.  c)Oven Room; On or about July 19, 2023 and at times prior, the employer exposed employees to laceration hazards and eye injuries, in that the small cut-off saw did not have a guard to protect employees when cutting the end of a motor off.  d)Winder Room; On or about July 19, 2023 and at times prior, the employer exposed employees to laceration and amputation hazards, in that suspended copper wire from storage buckets to the Samatic Coil Winding Machine (Type SA 2780 EXT Serial 1947M) did not have a guard to protect employees when monitoring motor coiling and when collecting items from storage racks located in the vicinity.
Recent events (2)
  • — I (S) $0
  • — Z (S) $4554

1910.1200 F06 II

Serious Gravity 5 2 instances 2 exposed
Issued
Penalty
Initial $4554.00 · Current $2648.00 Reduced
29 CFR  1910.1200(f)(6)(ii): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with product identifier and words, pictures, symbols, or combination thereof, which provided at least general information regarding the hazards of the chemicals:  (a) Oven Room; On or about July 19, 2023 and at times prior, the employer exposed employees to chemical hazards, in that the Xylene and Varnish dip tank did not contain a label indicating the contents and the physical and health hazards associate to the chemicals when employees are required to dip motor in the mixture daily.  b) Oven Room; On or about July 19, 2023 and at times prior, the employer exposed employees to chemical hazards, in that the Exxon Mobile Polyrex Grease did not contain a label indicating the contents and the physical and health hazards associated to the chemical when employees are required to apply the grease to motors daily.
Recent events (2)
  • — I (S) $2648
  • — Z (S) $4554

1910.1200 G08

Serious Gravity 5 2 instances 2 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR  1910.1200(g)(8):  The employer did not maintain in the workplace copies of the required safety data sheets for each hazardous chemical, and did not ensure that they were readily accessible during each work  shift to employees when they were in their work area(s)  a) Oven Room; On or about July 19, 2023 and at times prior, the employer exposed employees to chemical hazards, in that the safety data sheet for Exxon Mobile Polyrex Grease is not maintained at the workplace, employees are required to use the grease throughout the work day.  b) Oven Room; On or about July 19, 2023 and at times prior, the employer exposed employees to chemical hazards, in that the safety data sheets for the hazardous chemicals used on site were not readily accessible to employees who are required to use the hazards chemicals such as but not limited to Valero Xylene and Dolph's Varnish daily to perform work duties.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 H03 III

Serious Gravity 5 1 instance 2 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR  1910.1200(h)(3)(iii):Employee training did not include the measures employees can take to protect themselves from chemical hazards, including specific procedures the employer had implemented to protect employees from exposure to hazardous chemicals, such as appropriate work practices, emergency procedures and personal protective equipment to be used:  a) Oven Room; On or about July 19, 2023 and at times prior, the employer exposed employees to chemical hazards, in that hazard communication training was not provided to employees who are required to use hazardous chemicals such as but not limited to Valero Xylene, Dolph's Varnish, and Exxon Mobile Polyrex Grease daily to perform work duties.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.132 D02

Other-than-serious 1 instance 2 exposed
Issued
Penalty
Initial $426.00 · Current $426.00
29 CFR  1910.132(d)(2):The employer did not verify that the required workplace hazard assessment has been performed through a written certification which included the requirements as outlined in 29 CFR 1910.132(d)(2):  a) Oven Room; On or about July 19, 2023 and at times prior, the employer exposed employees to laceration and chemical hazards, in that the employer did not conduct a written certification of required personal protective equipment for employees who are required to work with cut-off saws, grinders, and dip tank daily to perform work duties.
Recent events (2)
  • — I (O) $426
  • — Z (O) $426

1910.133 B01 II

Other-than-serious 1 instance 2 exposed
Issued
Penalty
Initial $426.00 · Current $426.00
29 CFR  1910.133(b)(1)(ii):Protective eye devices did not comply with ANSI Z87.1-1989 providing employees appropriate protection when hazards associated with eye injuries were present in their job duties.   a) Oven Room; On or about July 19, 2023 and at times prior, the employer exposed to employees to eye injuries, in that face shields were not stored to prevent damage to the personal protective equipment when employees are required to use the face shields multiple times a day when performing different work duties.
Recent events (2)
  • — I (O) $426
  • — Z (O) $426

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346843584.