LIVE OAK, FL —
OSHA Inspection: WALSH RACE CRAFT, LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of WALSH RACE CRAFT, LLC in 1725 OHIO AVENUE SOUTH, LIVE OAK, FL 32064 (NAICS 336390). OSHA activity number 346893019.
Where did this inspection happen?
- Establishment
- WALSH RACE CRAFT, LLC
- Site address
- 1725 OHIO AVENUE SOUTH
- City
- LIVE OAK
- State
- FL
- ZIP
- 32064
- Mailing
- 1725 S. OHIO AVENUE, LIVE OAK, FL 32064
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336390
- Employees
- 9
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.215 A04
- Issued
- Abate by
- Penalty
- Initial $2679.00 · Current $1607.00 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one-eighth inch: a. In the Machine Shop, located at 1725 Ohio Avenue South, Live Oak, Florida: On or about August 8, 2023, the employer exposed employees to struck-by hazards while grinding metal materials, in that the pedestal mounted grinder's work rests were not adjusted closely to the wheel with a maximum opening of one-eighth inch.
Recent events (2)
- — I (S) $1607.4
- — Z (S) $2679
1910.215 B09
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one-fourth inch: a. In the Machine Shop, located at 1725 Ohio Avenue South, Live Oak, Florida: On or about August 8, 2023, the employer exposed employees to struck-by hazards while grinding metal materials, in that there was no adjustable tongue guard in place on the pedestal mounted grinder, and the end of the safety guard peripheral member at the top exceeded one-fourth inch.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.132 D02
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.132(d)(2): The employer did not verify that the required workplace hazard assessment has been performed through a written certification which included the requirements as outlined in 29 CFR 1910.132(d)(2): a. In the machine shop, located at 1725 Ohio Avenue South, Live Oak, FL: On or about August 8, 2023, the employer had not documented that a workplace hazard and personal protective equipment (PPE) assessment had been performed.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1200 E01
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: a. In the Machine Shop, located at 1725 Ohio Avenue South, Live Oak, Florida: On or about August 8, 2023, the employer exposed employees to chemical hazards, in that the employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200 (g), and (h) will be met for employees using machine cutting fluids and lubricating oils.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1200 G01
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.1200(g)(1): Employers did not have a safety data sheet in the workplace for each hazardous chemical which they use: a. In the Machine Shop, located at 1725 Ohio Avenue South, Live Oak, Florida: On or about August 8, 2023, the employer exposed employees to chemical hazards, in that the employer did not have safety data sheets in the workplace for each hazardous chemical which they use, including, but not limited to machine cutting fluids and lubricating oils.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1200 H01
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: a. In the Machine Shop, located at 1725 Ohio Avenue South, Live Oak, Florida: On or about August 8, 2023, the employer exposed employees to chemical hazards, in that the employer did not train employees on the hazardous chemicals, including but not limited to machine cutting fluids and lubricating oils, in their work area at the time of their initial assignment and whenever a new hazardous chemical was introduced into their work area.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 336390)
OGDEN, UT—2026-07-14
EXPEDITION ONE LLC
CIRCLEVILLE, OH—2026-07-07
ENGINEERED PLASTIC COMPONENTS INC.
BENTON HARBOR, MI—2026-06-30
LINAMAR STRUCTURES GROUP
NEW HUDSON, MI—2026-06-30
COSMA BODY ASSEMBLY MICHIGAN
OGDEN, UT—2026-06-23
AUTOLIV ASP INC
More inspections in FL
MARIANNA, FL—2026-07-16
BRANNON BROTHERS CONSTRUCTION, LLC
LAKELAND, FL—2026-07-16
SOUTHERN MILLING & LUMBER, INC.
OAKLAND PARK, FL—2026-07-16
PKB CABINETRY
LAKELAND, FL—2026-07-16
ELIJAH WHOLESALE, LLC.
TAMPA, FL—2026-07-16
VALENCIA WHOLESALE, INC.
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346893019.