FORT WORTH, TX —
OSHA Inspection: JESSE ARANDA
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of JESSE ARANDA in 9924 VILLA VERDE DRIVE, FORT WORTH, TX 76179 (NAICS 238140). OSHA activity number 347040875.
Where did this inspection happen?
- Establishment
- JESSE ARANDA
- Site address
- 9924 VILLA VERDE DRIVE
- City
- FORT WORTH
- State
- TX
- ZIP
- 76179
- Mailing
- 3063 W. VISTA CIRCLE, FORT WORTH, TX 76133
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 6
- Ownership type
- A
Citations
7 citations on file for this inspection.
1926.100 A
- Issued
- Penalty
- Initial $1763.00 · Current $1763.00
General-duty citation text
29 CFR 1926.100(a): Employees were not protected by protective helmets while working in areas where there was a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns: On or about October 17, 2023, and at times prior thereto, the employer did not ensure that employees were wearing hardhats while working below active bricklaying operations, exposing employees to a struck-by hazard(s) from falling objects.
Recent events (1)
- — Z (S) $1763
1926.451 E01
- Issued
- Abate by
- Penalty
- Initial $2765.00 · Current $2765.00
General-duty citation text
29 CFR 1926.451(e)(1): When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, structure, personnel hoist, or similar surface was not used: On or about October 17, 2023, and at times prior thereto, employees used the cross braces of the scaffold to gain access to the working platforms, exposing them to fall hazards.
Recent events (1)
- — Z (S) $2765
1926.451 G04 I
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1926.451(g)(4)(i): Guardrail systems were not installed along all open sides and ends of platforms: On or about October 17, 2023, and at times prior thereto, employees were working on a welded frame scaffold at heights of 10 feet or greater from a lower level without the use of guardrails, exposing them to fall hazards.
Recent events (1)
- — Z (S) $0
1926.451 H02 II
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1926.451(h)(2)(ii): A toeboard was not erected along the edge of platforms more than 10 feet (3.1 m) above lower levels for a distance sufficient to protect employees below: On or about October 17, 2023, and at times prior thereto, employees were conducting bricklaying operation from a welded frame scaffold without toeboards, exposing employees working below to a struck-by hazards.
Recent events (1)
- — Z (S) $0
1926.454 A
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1926.454(a):The employer did not have each employee who performed work while on scaffold(s) trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold(s) being used and to understand the procedures to control or minimize those hazards: On or about October 17, 2023, and at times prior thereto, employees were working on a welded frame scaffold system without the knowledge and skills to recognize and eliminate hazards associated with working from scaffolds, exposing them to struck-by and fall hazards.
Recent events (1)
- — Z (S) $0
1926.1153 C01
- Issued
- Abate by
- Penalty
- Initial $2074.00 · Current $2074.00
9000
General-duty citation text
29 CFR 1926.1153(c)(1): For each employee engaged in a task identified on Table 1, the employer did not fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1, unless the employer assesses and limits the exposure of the employee to respirable crystalline silica in accordance with paragraph (d) of this section: On or about October 17, 2023, and at times prior thereto, an employee was using a stationary masonry saw to dry cut bricks and was not protected from being exposed to crystalline silica dust with the use of engineering controls, work practices, and respiratory protection.
Recent events (1)
- — Z (S) $2074
1926.1153 G01
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
9000
General-duty citation text
29 CFR 1926.1153(g)(1): The employer did not establish and implement a written exposure control plan: On or about October 17, 2023, and at times prior thereto, the employer did not ensure that employees using a masonry saw to dry cut bricks were protected from exposure to respirable crystalline silica.
Recent events (1)
- — Z (S) $0
More inspections in this industry (NAICS 238140)
MARIANNA, FL—2026-07-13
PRIMETIME MOBILE MASONRY LLC
LOMPOC, CA—2026-07-10
UNKNOWN EMPLOYER
FREEHOLD, NJ—2026-07-10
CRAIG'S MASONRY & HARDSCAPE LLC
CINCINNATI, OH—2026-07-09
ALL AMERICAN CONCRETE LLC
NEW YORK, NY—2026-07-08
JEY CONSTRUCTIONS WORKS CORP
More inspections in TX
SPRING, TX—2026-07-10
DORSTENER WIRE TECH INC.
FORT WORTH, TX—2026-07-10
RC PROFESSIONAL ROOFING OF TEXAS LLC
CYPRESS, TX—2026-07-10
FEDERICO CARVAJAL GARCIA
SAN ANTONIO, TX—2026-07-10
ED LONG'S METAL WORKS
SAN ANTONIO, TX—2026-07-09
WAREHOUSE RACK COMPANY, LP
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347040875.