Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: KARNAK CONCRETE

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of KARNAK CONCRETE in 3200 VINE STREET, CINCINNATI, OH 45220 (NAICS 238110). OSHA activity number 347044935.

Watch Karnak Concrete — free Get an email when a new federal OSHA severe-injury report for Karnak Concrete is published. One employer, no account, unsubscribe in one click.
Establishment
KARNAK CONCRETE
Site address
3200 VINE STREET
City
CINCINNATI
State
OH
ZIP
45220
Mailing
2678 MORROW PLACE, CINCINNATI, OH 45204
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
238110
Employees
3
Ownership type
A

5 citations on file for this inspection.

1903.19 C01

Other-than-serious 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $388.00 · Current $388.00
29 CFR  1903.19(c)(1): Within 10 calendar days after the abatement date, the employer must certify to OSHA (the Agency) that each cited violation has been abated, except as provided in paragraph (c)(2) of this section.  a) Ongoing since March 15, 2024, the employer failed to certify to OSHA that Citation 1 Item 2a and Citation 1 Item 2b have been abated. Specifically, the employer has not provided abatement certification or documentation for Citation 1 Item 2a, demonstrating the implementation of engineering controls to prevent employee exposure to respirable crystalline silica, or for Citation 1 Item 2b, demonstrating compliance with exposure assessment requirements for silica hazards.
Recent events (1)
  • — Z (O) $388

1926.1153 C01

Deleted Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $3349.00 · Current $0.00 Reduced
29 CFR  1926.1153(c)(1):Specified exposure control methods. For each employee engaged in a task identified on Table 1, the employer shall fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1, unless the employer assesses and limits the exposure of the employee to respirable crystalline silica in accordance with paragraph (d) of this section.  a)  On or about October 19, 2023, the employer failed to implement the engineering controls listed in Table 1 by ensuring that a continuous watering system was used when employees were cutting asphalt driveways containing respirable crystalline silica with handheld power saws. As a result, employees were exposed to the hazard of inhaling respirable crystalline silica dust.
Recent events (3)
  • — F (S) $0
  • — C (S) $3349
  • — Z (S) $3349

1926.1153 D02 I

Deleted Serious Gravity 10 1 instance 1 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR  1926.1153(d)(2)(i):General. The employer shall assess the exposure of each employee who is or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2)(ii) or the scheduled monitoring option in paragraph (d)(2)(iii) of this section.  a)  On or about October 19, 2023, the employer failed to assess the exposure of employees to respirable crystalline silica while they were dry cutting an asphalt driveway, As a result, employees were exposed to respirable crystalline silica, with no adequate monitoring or protective measures in place.
Recent events (3)
  • — F (S) $0
  • — C (S) $0
  • — Z (S) $0

1926.1153 G01

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $3349.00 · Current $3349.00
29 CFR  1926.1153(g)(1):Written exposure control plan. The employer shall establish and implement a written exposure control plan that contains at least the following elements: (i): A description of the tasks in the workplace that involve exposure to respirable crystalline silica; (ii): A description of the engineering controls, work practices, and respiratory protection used to limit employee exposure to respirable crystalline silica for each task; (iii): A description of the housekeeping measures used to limit employee exposure to respirable crystalline silica; and (iv): A description of the procedures used to restrict access to work areas, when necessary, to minimize the number of employees exposed to respirable crystalline silica and their level of exposure, including exposures generated by other employers or sole proprietors.  a) On or about October 19, 2023, the employer had not established and implemented a written silica exposure control plan for employees exposed to respiratory crystalline while cutting on concrete and asphalt driveways.
Recent events (3)
  • — F (S) $3349
  • — C (S) $3349
  • — Z (S) $3349

1926.1153 I02 I

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $3349.00 · Current $0.00 Reduced
29 CFR  1926.1153(i)(2)(i):Employee information and training. The employer shall ensure that each employee covered by this section can demonstrate knowledge and understanding of at least the following: A) The health hazards associated with exposure to respirable crystalline silica; B) Specific tasks in the workplace that could result in exposure to respirable crystalline silica; C)Specific measures the employer has implemented to protect employees from exposure to respirable crystalline silica, including engineering controls, work practices, and respirators to be used; D) The contents of this section; E) The identity of the competent person designated by the employer in accordance with paragraph (g)(4) of this section; and  a) On or about October 19, 2023, the employer failed to provide the required training and information on the hazards associated with respirable crystalline silica to employees performing tasks, such as but not limited to, cutting asphalt and concrete. As a result, employees were exposed to respirable crystalline silica without adequate knowledge or measures to protect their health and safety.
Recent events (3)
  • — F (S) $0
  • — C (S) $3349
  • — Z (S) $3349

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347044935.