Safety Incidents OSHA Severe Injury Reports · 2015–2025
3,913,242Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

SAINT MARTINVILLE, LA —

OSHA Inspection: ENTERPRISES

Referral inspection · Safety discipline

At a glance

On , OSHA opened a referral safety inspection of ENTERPRISES in 1018 CONDE ROAD, SAINT MARTINVILLE, LA 70582 (NAICS 332999). OSHA activity number 347051500.

Watch Enterprises — free Get an email when a new federal OSHA severe-injury report for Enterprises is published. One employer, no account, unsubscribe in one click.

Where did this inspection happen?

Establishment
ENTERPRISES
Site address
1018 CONDE ROAD
City
SAINT MARTINVILLE
State
LA
ZIP
70582
Mailing
1018 CONDE ROAD, SAINT MARTINVILLE, LA 70582

What kind of inspection was it?

Inspection type
Referral (C)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B

When did the case open and close?

Opened
Closing conference
Last modified
Data loaded

Establishment context

NAICS code
332999
Employees
3
Ownership type
A

Citations

6 citations on file for this inspection.

1904.39 A02

Deleted Other-than-serious 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $3349.00 · Current $0.00 Reduced

General-duty citation text

29 CFR  1904.39(a)(2):Basic Requirement. Within twenty-four (24) hours after the in-patient hospitalization of one or more employees or an employee's amputation or an employee's loss of an eye.  a) The employer did not report an 2nd and 3rd degree burn incident that occurred on or about August 24, 2023,  at 1018 Conde Road, Saint Martinville, LA 70582 within the required 24 hours after knowing of the hospitalization.  The injury was reported on October 19, 2023
Recent events (2)
  • — I (O) $0
  • — Z (O) $3349

1910.132 A

Deleted Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $4688.00 · Current $0.00 Reduced

General-duty citation text

29 CFR  1910.132(a):Protective equipment, including personal protective equipment for eyes, face, head, and extremities, protective clothing, respiratory devices, and protective shields and barriers was not provided:  On or about August 24, 2023, in the shop disassemble area, employees did not wear personal protective equipment in the following instances:  a) While using cutting torch an active hot process, employee did not wear any face protection.  b) While  using cutting torch an active hot process, employee did not wear any hand protection.
Recent events (2)
  • — I (S) $0
  • — Z (S) $4688

1910.132 D01

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.132(d)(1):The employer shall assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE):  a) On or about August  24, 2023, outside the  shop dissemble area, employee was allowed to perform  job duty torch cutting of an used air conditions unit without the completion of a hazard assessment in order to identify hazards that require personal protective equipment (PPE).
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.132 F01

Serious Gravity 10 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.132(f)(1):The employer shall provide training to each employee who is required by this section to use PPE. Each such employee shall be trained to know at least the following:  a) On or before August 24, 2023 employer did not provide any personal protective equipment or training to their employees in order to prevent from injury.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.252 A03 I

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $4688.00 · Current $4688.00

General-duty citation text

29 CFR  1910.252(a)(3)(i):Welding, cutting, or other hot work was performed on used drums, barrels, tanks, or other containers that had not been cleaned so thoroughly as to make absolutely certain there were no flammable materials :   On or before August 24, 2023  outside the  shop dissemble area, employee was allowed to perform  job duty of torch cutting an used air condition units without the completion of a hazard assessment in order to identify hazards.
Recent events (2)
  • — I (S) $4688
  • — Z (S) $4688

1910.1200 B04 II

Serious Gravity 10 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $4688.00 · Current $4688.00

General-duty citation text

29 CFR  1910.1200(b)(4)(ii):Employers shall maintain copies of any safety data sheets that are received with incoming shipments of the sealed containers of hazardous chemicals,  and shall ensure that the safety data sheets are readily accessible :  a) On or before August 24, 2023, the  employer facility did not implement  a safety data sheet for the hazardous chemical from a air condition unit that was distributed at the facility.
Recent events (2)
  • — I (S) $4688
  • — Z (S) $4688

More inspections in this industry (NAICS 332999)

More inspections in LA

Source

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347051500.