OSHA Inspection: CHRIS CUNNINGHAM

Issued

2023-12-27 00:00:00

Abate by

2024-02-05 00:00:00

Penalty

Initial $376.00 · Current $376.00

General-duty citation text

29 CFR  1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:   The employer did not submit certification that abatement is complete, including the date and method of abatement, for each citation that required it and was issued on November 14, 2023, discussed during the informal conference of December 17, 2023 and in the Abatement Verification letter dated December 18, 2023.

Issued

2023-12-27 00:00:00

Abate by

2024-02-05 00:00:00

Penalty

Initial $376.00 · Current $376.00

General-duty citation text

29 CFR  1903.19(d)(1): The employer did not submit to the Agency documents demonstrating that abatement is complete for each willful or repeat violation and for any serious violation for which the Agency indicates in the citation that such abatement documentation is required.   The employer did not provide documentation that abatement is complete, including the date and method of abatement, for each citation that required it and was issued on November 14, 2023, discussed during the informal conference of December 17, 2023 and in the Abatement Verification letter dated December 18, 2023.

Issued

2023-11-14 00:00:00

Abate by

2023-11-30 00:00:00

Penalty

Initial $3349.00 · Current $3349.00

General-duty citation text

29 CFR  1926.20(b)(1):  The employer did not initiate and maintain accident prevention programs as necessary to comply with this part:  On or about November 9, 2023, an employee was exposed to fall hazards while working from a low slope commercial roof without fall protection and without being tied off with a lanyard to the boom or basket off an aerial lift, on a commercial construction site in Danville, Illinois.  The employer did not have an effective safety and health program with specific work rules, competent person oversight, and employee training to govern employee's activities.

Issued

2023-11-14 00:00:00

Abate by

2023-11-24 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1926.20(b)(2):  The employer did not initiate and maintain programs which provided for frequent and regular inspections of the job site, materials and equipment to be made by a competent person(s):  On or about November 9, 2023, an employee was exposed to fall hazards while working from a low slope commercial roof without fall protection and without being tied off with a lanyard to the boom or basket off an aerial lift, on a commercial construction site in Danville, Illinois.  The employer did not have a competent person conducting frequent and periodic safety inspections at the construction site.

Issued

2023-11-14 00:00:00

Abate by

2023-11-24 00:00:00

Penalty

Initial $3349.00 · Current $3349.00

General-duty citation text

29 CFR  1926.453(b)(2)(v):  A body belt with lanyard attached to the boom or basket was not worn by employee(s) working from an aerial lift:  On or about November 9, 2023, an employee was exposed to fall hazards of 12 feet while working from an aerial lift, and the employer was not connected to the boom or basket of the aerial lift by a lanyard and body harness, on a commercial construction site in Danville, Illinois.

Issued

2023-11-14 00:00:00

Abate by

2023-11-24 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1926.454(a):  The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards:  On or about November 9, 2023, an employee was exposed to fall hazards from an aerial lift, on a commercial construction site in Danville, Illinois.  The employer did not provide scaffold training.  This training would include:  a.	Nature of any electrical hazards, fall hazards, and falling object hazards in the work area, b.	Correct procedures for dealing with electrical hazards and for erecting, maintaining, and disassembling the fall protection systems and falling object protection systems used, c.	Proper use of the scaffold, and the proper handling of material on the scaffold,  d.	The maximum intended load and the load-carrying capacities of the scaffold used, e.	Any other pertinent requirements of this subpart, L - Scaffolds.

Issued

2023-11-14 00:00:00

Abate by

2023-11-24 00:00:00

Penalty

Initial $4688.00 · Current $4688.00

General-duty citation text

29 CFR  1926.501(b)(10):  Each employee engaged in roofing activities on low-slope roofs with unprotected sides and edges 6 feet or more above lower levels, was not protected from falling by guardrail systems, safety net systems, personal fall arrest systems, or a combination of warning line system and guardrail system, warning line system and safety net system, or warning line system and personal fall arrest system, or warning line system and safety monitoring system.  Or, on roofs 50-feet (15.25 m) or less in width, each employee was not protected by use of a monitoring system:    On or about November 9, 2023, an employee was exposed to fall hazards of 12 feet without fall protection while working on a low slope roof, on a commercial construction site in Danville, Illinois.

Issued

2023-11-14 00:00:00

Abate by

2023-11-24 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1926.503(a)(1):  The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:  On or about November 9, 2023, an employee was exposed to fall hazards of 12 feet without fall protection while working on a low slope roof, on a commercial construction site in Danville, Illinois.   The employer did not provide construction safety training to employees, in order to provide them with the knowledge necessary to recognize the hazards of falling and the safety requirements associated with fall protection, as well as the proper work procedures to follow, in order to minimize and eliminate the fall hazards.