1,224,460Inspections Most recent open 2026-07-13 Last loaded 2026-07-16
Safety Incidents OSHA Severe Injury Reports · 2015–2025

OSHA Inspection: FLEXTECH INDUSTRIES LTD

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of FLEXTECH INDUSTRIES LTD in 948 NUSSBAUM ST, CLINTON, MO 64735 (NAICS 332313). OSHA activity number 347229890.

Watch Flextech Industries LTD — free Get an email when a new federal OSHA severe-injury report for Flextech Industries LTD is published. One employer, no account, unsubscribe in one click.
Site address
948 NUSSBAUM ST
City
CLINTON
State
MO
ZIP
64735
Mailing
948 NUSSBAUM ST, CLINTON, MO 64735
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332313
Employees
29
Ownership type
A

5 citations on file for this inspection.

1910.178 L04 III

Other-than-serious Gravity 5 1 instance 3 exposed
Issued
Penalty
Initial $6857.00 · Current $5485.00 Reduced
29 CFR  1910.178(l)(4)(iii):An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years:  At a facility located at 948 Nussbaum Street, Clinton MO, 64735, employees were exposed to struck by hazards.  The employer exposed the employees to these hazards by allowing them to operate powered industrial trucks without evaluating each operators performance at least once every three years.
Recent events (2)
  • — I (O) $5485
  • — Z (S) $6857

1910.212 A01

Serious Gravity 10 1 instance 2 exposed
Issued
Penalty
Initial $11292.00 · Current $6775.00 Reduced
29 CFR  1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  At a facility located at 948 Nussbaum Street, Clinton MO, 64735, employees were exposed to caught in and amputation hazards.  The employer exposed the employees to these hazards by allowing them to operate a SHARP-2280B lathe to sand products by holding a piece of sanding material in both hands while positioning it behind the rotating product that was being sanded.
Recent events (2)
  • — I (S) $6775.2
  • — Z (S) $11292

1910.212 A03 III

Deleted Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $8067.00 · Current $0.00 Reduced
29 CFR  1910.212(a)(3)(iii):Special hand tools for placing and removing material(s) was not provided to permit easy handling of material without the operator placing a hand in the danger zone:  At a facility located at 948 Nussbaum Street, Clinton MO, 64735, employees were exposed to amputation, caught in, and crushed by hazards.  The employer exposed the employees to these hazards by allowing them to operate a Cincinnati 300-2000 Form Master Hydraulic Press Brake, while their hands were near the point of operation and without the use of special hand tools.
Recent events (2)
  • — I (S) $0
  • — Z (S) $8067

1910.1200 H03 II

Other-than-serious Gravity 1 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $4839.00 · Current $3871.00 Reduced
29 CFR  1910.1200(h)(3)(ii):Employee training did not include the physical and health hazards of the chemicals in the work area:  At a facility located at 948 Nussbaum Street, Clinton MO, 64735, employees were exposed to health hazards associated with the use of chemicals and lacked proper training on these hazards.  The employer exposed the employees to these hazards by allowing them to use a chemical identified as Sharpcool Water Soluble while operating machines in the South Bay of the facility.  The hazard statement listed on the Safety Data Sheet for the chemical explained that it may cause damage to organs through prolonged or repeated exposures.
Recent events (2)
  • — I (O) $3871.2
  • — Z (S) $4839

1910.178 A06

Other-than-serious 2 instances 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1910.178(a)(6):The employer did not ensure that all nameplates or markings were maintained in a legible condition:  At a facility located at 948 Nussbaum Street, Clinton MO, 64735, employees were exposed to struck by hazards.  The employer exposed the employees to this hazard by allowing them to operate powered industrial trucks that did not have legible markings for their operating controls.  Instances of exposure include but are not limited to:  Instance 1:  Operators of the Case 586E powered industrial truck were exposed to struck by hazards in that the powered industrial truck did not have legible markings indicating what function each control performed.    Instance 2:  Operators of the Yale Type LP Industrial Truck were exposed to struck by hazards in that the powered industrial truck did not have legible markings indicating what function each control performed.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347229890.