OSHA Inspection: KALOO MARKET INC.

Issued

2024-08-06 00:00:00

Abate by

2024-09-09 00:00:00

Penalty

Initial $518.00 · Current $311.00 Reduced

General-duty citation text

29 CFR  1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:  (a) Establishment:  As of August 6, 2024, the employer had not certified to OSHA that the abatement had been completed for Citation 1, Item 1, and Citation 2, Items 1 and 2, from inspection number 1725346, issued on 4/16/2024, with a final order date of 5/10/2024.

Issued

2024-08-06 00:00:00

Abate by

2024-09-09 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1903.19(d)(1):The employer did not submit to the Agency documents demonstrating that abatement is complete for each willful or repeat violation and for any serious violation for which the Agency indicates in the citation that such abatement documentation is required.  (a) Establishment: As of August 6, 2024, the employer had not provided the required abatement documentation to OSHA for Citation 1, Item 1, and Citation 2, Items 1 and 2, from inspection number 1725346, issued on 4/16/2024, with a final order date of 5/10/2024.

Issued

2024-04-16 00:00:00

Abate by

2024-05-31 00:00:00

Penalty

Initial $3687.00 · Current $2212.00 Reduced

General-duty citation text

29 CFR  1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks.  a) Deli: On or about 2/2/2024 and times prior, the band saw was operated without the blade guard lowered, to cut meats.

Issued

2024-04-16 00:00:00

Abate by

2024-05-31 00:00:00

Penalty

Initial $518.00 · Current $311.00 Reduced

General-duty citation text

29 CFR  1910.147(c)(1): The employer did not establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative.   a) Deli Area: On or about 2/2/2024, the employer did not develop and implement a lockout tagout program, to ensure employees changing parts on a meat grinder were protected from hazards.

Issued

2024-04-16 00:00:00

Abate by

2024-05-31 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling.  a) Deli: On or about 2/2/2024, the employer did not use a KitchenAid Mixer as labeled, in that the appliance was not intended for commercial use.