OSHA Inspection: SAP MANUFACTURING, LLC

Issued

2024-04-24 00:00:00

Abate by

2024-05-31 00:00:00

Penalty

Initial $4149.00 · Current $3000.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(4)(ii): Procedures did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, 29 CFR 1910.147(c)(4)(ii)(A), (c)(4)(ii)(B), (c)(4)(ii)(C) and (c)(4)(ii)(D):   (a) Production Floor - On or about February 23, 2024, employees were required to follow energy control procedures when doing servicing and maintenance activities that did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques, to be utilized for the control of hazardous energy.  Abatement Certification Required.

Issued

2024-04-24 00:00:00

Abate by

2024-05-31 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed:   (a) Production Floor - On or about February 23, 2024, employees were required to follow energy control procedures when conducting servicing and maintenance and the procedures had not been inspected at least annually.   Abatement Certification Required.

Issued

2024-04-24 00:00:00

Penalty

Initial $3526.00 · Current $2500.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s):  (a) Production Floor - On or about December 15, 2023, employees using the vertical bandsaw were exposed to amputation hazards because the unused portion of the blade was not guarded.    Certification Not Required.

Issued

2024-04-24 00:00:00

Abate by

2024-05-31 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.132(d)(2): The employer did not verify, through a written certification, that the required workplace hazard assessment had been performed:   (a) Site Wide - On or about February 23, 2024, the employer did not verify that a workplace hazard assessment had been performed when employees were required to wear personal protection equipment.  Abatement Certification Required.

Issued

2024-04-24 00:00:00

Abate by

2024-05-31 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.147(c)(7)(iv): The employer's certification of employee training did not contain each employee's name and date of training:  (a) Site Wide - On or about February 23, 2024, the employer did not certify that an employee had been trained on the energy control program and procedures.  (b) Site Wide - On or about February 23, 2024, the employer did not record the date of training on the energy control program training certification.   Abatement Certification Required.