Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,214Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: MCCAIN MILLS, INC.

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of MCCAIN MILLS, INC. in 5605 PAUL SOUTH BUCHMAN HIGHWAY, PLANT CITY, FL 33565 (NAICS 321113). OSHA activity number 347390239.

Watch Mccain Mills, INC. — free Get an email when a new federal OSHA severe-injury report for Mccain Mills, INC. is published. One employer, no account, unsubscribe in one click.
Establishment
MCCAIN MILLS, INC.
Site address
5605 PAUL SOUTH BUCHMAN HIGHWAY
City
PLANT CITY
State
FL
ZIP
33565
Mailing
5605 PAUL SOUTH BUCHMAN HIGHWAY, PLANT CITY, FL 33565
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
321113
Employees
9
Ownership type
A

6 citations on file for this inspection.

1910.157 C01

Serious Gravity 5 1 instance 9 exposed
Issued
Abate by
Penalty
Initial $2765.00 · Current $2765.00
29 CFR  1910.157(c)(1):Portable fire extinguishers were not mounted, located and identified so that they were readily accessible without subjecting the employees to injuries:  a.) ) At the woodworking shop, located at 5605 Paul South Buchman Highway Plant City, Florida: On or about March 20, 2024, employees were exposed to smoke, fire, and entrapment hazards, in that, the portable fire extinguishers location was not identified and access was blocked by a cart..
Recent events (1)
  • — Z (S) $2765

1910.178 L06

Serious Gravity 5 1 instance 3 exposed
Issued
Penalty
Initial $3457.00 · Current $3457.00
29 CFR  1910.178(l)(6):The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l):  a) At the woodworking shop, located at 5605 Paul South Buchman Highway Plant City, Florida: On or about March 20, 2024, the employer failed to certify that powered industrial trucks operators had been trained and evaluated, exposing employees to crush-by and struck-by hazards.
Recent events (1)
  • — Z (S) $3457

1910.213 S06

Serious Gravity 5 1 instance 9 exposed
Issued
Abate by
Penalty
Initial $3457.00 · Current $3457.00
29 CFR  1910.213(s)(6): Cleanliness around working machinery was not maintained to prevent fire hazards and ensure the effective functioning of guards:   a) At the woodworking shop, located at 5605 Paul South Buchman Highway Plant City, Florida: On or about March 20, 2024, wood dust accumulation ranging from 1/8-inch deep to 6-inches deep was observed around and under the Siemens Point Saw near moving parts and electrical components which create heat, exposing employees to a fire hazard.
Recent events (1)
  • — Z (S) $3457

1910.219 F03

Serious Gravity 5 1 instance 9 exposed
Issued
Abate by
Penalty
Initial $3457.00 · Current $3457.00
29 CFR  1910.219(f)(3): Sprocket wheels and chains which were seven (7) feet or less above floors or platforms were not enclosed:   a.)  At the woodworking shop, located at 5605 Paul South Buchman Highway Plant City, Florida: On or about March 20, 2024, employees were exposed to caught-in and nip point hazards created by the rotating motion of the chain and sprocket, in that, safeguarding methods were not used.
Recent events (1)
  • — Z (S) $3457

1910.305 G01 IV A

Serious Gravity 5 1 instance 9 exposed
Issued
Abate by
Penalty
Initial $2765.00 · Current $2765.00
29 CFR  1910.305(g)(1)(iv)(A):Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure:  a.)  At the woodworking shop, located at 5605 Paul South Buchman Highway Plant City, Florida: On or about March 20, 2024, the employer used an extension cord in place of permanent wiring for the floor fan, exposing employees to electrical hazards.
Recent events (1)
  • — Z (S) $2765

1910.95 C01

Other-than-serious 3 instances 9 exposed
Issued
Abate by
Penalty
Initial $388.00 · Current $388.00

Hazardous substances 81108111

29 CFR  1910.95(c)(1): The employer did not administer a continuing, effective hearing conservation program as described in 29 CFR 1910.9(c) through (o) whenever employee noise exposures equal or exceed an 8-hour time-weighted average sound level of 85 decibels measured on the A scale, or equivalently a dose of fifty percent:  a) Sawmill Department: the operator of the AMA Gang Saw 1, was exposed to continuous noise levels at 132.2% of the allowable 8-hour TWA-Action Level (85 dBA).  The equivalent dBA of 132.2% is 92.01 dBA.  The sampling was performed for 461-minutes during one shift on April 24, 2024.  Zero exposure was assumed for the 19-minute period not sampled.  b) Sawmill Department: the operator of the AMA Gang Saw 1, was exposed to continuous noise levels at 163.5% of the allowable 8-hour TWA-Action Level (85 dBA).  The equivalent dBA of 163.5% is 93.5 dBA.  The sampling was performed for 462-minutes during one shift on April 24, 2024.  Zero exposure was assumed for the 18-minute period not sampled.  c) Sawmill Department: the operator of the Siemens Point Saw , was exposed to continuous noise levels at 133.1% of the allowable 8-hour TWA-Action Level (85 dBA).  The equivalent dBA of 133.1% is 92.06 dBA.  The sampling was performed for 464-minutes during one shift on April 24, 2024.  Zero exposure was assumed for the 16-minute period not sampled.
Recent events (1)
  • — Z (O) $388

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347390239.