Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: JOSE JESUS RIVERA

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of JOSE JESUS RIVERA in 5402 STONE LANE, MIDLOTHIAN, TX 76065 (NAICS 238140). OSHA activity number 347412595.

Watch Jose Jesus Rivera — free Get an email when a new federal OSHA severe-injury report for Jose Jesus Rivera is published. One employer, no account, unsubscribe in one click.
Establishment
JOSE JESUS RIVERA
Site address
5402 STONE LANE
City
MIDLOTHIAN
State
TX
ZIP
76065
Mailing
508 GREEN ACRES DRIVE, PALMER, TX 75152
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
238140
Employees
11
Ownership type
A

5 citations on file for this inspection.

1926.102 A01

Serious Gravity 1 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2765.00 · Current $1659.00 Reduced
29 CFR 1926.102(a)(1): The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.  At the job site, employees were not provided eye protection when operating a Milwaukee right hand angle saw to cut bricks/stone, were exposed to eye injuries from flying objects.
Recent events (2)
  • — I (S) $1659
  • — Z (S) $2765

1910.134 A02

Serious Gravity 1 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2765.00 · Current $1659.00 Reduced
29 CFR 1910.134(a)(2):  A respirator was not provided by the employer to each employee when such equipment was necessary to protect the health of the employee: (Construction Reference 1926.103)  At the jobsite, employees who were cutting masonry stone/bricks with a Dewalt masonry saw and a Milwaukee right hand angle saw were not protected with personal protective equipment and exposed to respiratory hazards from the dust, silica dust and particles.
Recent events (2)
  • — I (S) $1659
  • — Z (S) $2765

1926.1153 C01

Serious Gravity 1 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2765.00 · Current $1659.00 Reduced
29 CFR 1926.1153(c)(1): For each employee engaged in a task identified on Table 1, the employer shall fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1, unless the employer assesses and limits the exposure of the employee to respirable crystalline silica in accordance with paragraph (d) of this section.  At the construction site, the employer did not ensure that employees using a masonry saw to cut bricks were protected from being exposed to silica with the use of engineering controls, work practices and respiratory protection.
Recent events (2)
  • — I (S) $1659
  • — Z (S) $2765

1926.1153 D02 I

Serious Gravity 1 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.1153(d)(2)(i): The employer did not assess the exposure of each employee who was or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2)(ii) or the scheduled monitoring option in paragraph (d)(2)(iii) of this section:  At the residential construction site, the employer did not assess the exposure for employees using a stationary masonry saw to cut bricks. Employees were potentially exposed to silicia.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 E01

Other-than-serious 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: (Construction Reference: 1926.59)(a)   At the jobsite, The employer had not developed a written hazard communication program for employees using a masonry saw to cut bricks. Employees were potentially exposed to respirable crystalline silica.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347412595.