Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,214Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

STAMFORD, CT —

OSHA Inspection: DANO ENTERPRISES INC.

Referral inspection · Safety discipline

At a glance

On , OSHA opened a referral safety inspection of DANO ENTERPRISES INC. in 4 OMEGA DRIVE 4 RIVER BEND CENTER, STAMFORD, CT 06907 (NAICS 322220). OSHA activity number 347462376.

Watch Dano Enterprises INC. — free Get an email when a new federal OSHA severe-injury report for Dano Enterprises INC. is published. One employer, no account, unsubscribe in one click.

Where did this inspection happen?

Establishment
DANO ENTERPRISES INC.
Site address
4 OMEGA DRIVE 4 RIVER BEND CENTER
City
STAMFORD
State
CT
ZIP
06907
Mailing
4 OMEGA DRIVE 4 RIVER BEND CENTER, STAMFORD, CT 06907

What kind of inspection was it?

Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B

When did the case open and close?

Opened
Closing conference
Case closed
Last modified
Data loaded

Establishment context

NAICS code
322220
Employees
9
Ownership type
A

Citations

10 citations on file for this inspection.

1910.147 C01

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $2765.00 · Current $1383.00 Reduced

General-duty citation text

29 CFR  1910.147(c)(1):The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative:  WORKSHOP:  On/or about May 3, 2024, or prior to the employer did not establish hazardous energy control lockout/tagout program for the employees on the machinery such as but not limited to the Ender Compactor Bag machine.
Recent events (2)
  • — I (S) $1382.5
  • — Z (S) $2765

1910.147 C04 I

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:   WORKSHOP:  On/or about May 3, 2024, or prior to the employer did not establish hazardous energy control lockout/tagout procedures for the employees on the machinery such as but not limited to the Ender Compactor Bag machine.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.147 C07 I

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.147(c)(7)(i):The employer did not provide adequate training to ensure that the purpose and function of the energy control program was understood by employees:  WORKSHOP:  On/or about May 3, 2024, or prior to the employer did not provide hazardous energy control lockout/tagout training for the affected and or other employees on the machinery such as but not limited to the Ender Compactor Bag machine.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.219 C02 I

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $3457.00 · Current $1729.00 Reduced

General-duty citation text

29 CFR  1910.219(c)(2)(i):All exposed part(s) of horizontal shafting seven (7) feet or less from floor or working platform were not protected by stationary casing(s) enclosing shafting completely or by trough(s) enclosing sides and top or sides and bottom of shafting:  WORKSHOP:  On/or about May 3, 2024 and prior to the horizontal shafting located in Sections A, B, and C of the Ender Compactor Bag machine (custom made machine) were unguarded.
Recent events (2)
  • — I (S) $1728.5
  • — Z (S) $3457

1910.219 D01

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.219(d)(1):Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o):  WORKSHOP:  On/or about May 3, 2024 and prior to the employer did not guard the pulleys located in Sections A, B, and C of the Ender Compactor Bag machine (custom made machine) were  unguarded.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.219 E01 I

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $2765.00 · Current $1383.00 Reduced

General-duty citation text

29 CFR  1910.219(e)(1)(i):Horizontal belts which had both runs seven feet or less from the floor level were not guarded with a guard that extended to at least fifteen inches above the belt:  WORKSHOP:  On/or about May 3, 2024 and prior to the employer did not guard the horizontal belts located in Sections A, B, and C of the Ender Compactor Bag machine (custom made  machine) were unguarded.
Recent events (2)
  • — I (S) $1382.5
  • — Z (S) $2765

1910.219 E03 I

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.219(e)(3)(i):Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o):  WORKSHOP:  On/or about May 3, 2024 and prior to the employer did not guard the inclined vertical belts located in Sections A, B, and C of the Ender Compactor Bag machine (custom made  machine) were unguarded.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.219 F03

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $2765.00 · Current $1383.00 Reduced

General-duty citation text

29 CFR  1910.219(f)(3):Sprocket wheels and chains which were seven (7) feet or less above floors or platforms were not enclosed:  WORKSHOP:  On/or about May 3, 2024 and prior to, the employer did not guard the sprocket wheels and chains which were seven (7) feet or less above floors or platforms were not enclosed.
Recent events (2)
  • — I (S) $1382.5
  • — Z (S) $2765

1910.1200 E01

Other-than-serious 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.1200(e)(1):Employer had not developed or implemented a written hazard communication program that included the requirements outlined in 29 CFR 1910.1200(e)(1)(i) and (e)(1)(ii):  WORKSHOP: On/or about May 3, 2024 and prior to, the employer did not establish a written hazard communication program included the Globalized Harmonized System (GHS), where the employees were required to work with and handle hazardous chemicals, such as (but not limited to) H.B. Fuller WB-8060 water based adhesive.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.1200 H01

Other-than-serious 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.1200(h)(1):Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:  WORKSHOP: On/or about May 3, 2024 and prior to, the employer did not provide training and information to the employee on the hazard communication program including the Globalized Harmonized System (GHS) for the employees required to work with chemicals, such as (but not limited to) H.B. Fuller WB-8060 water based adhesive.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

More inspections in this industry (NAICS 322220)

More inspections in CT

Source

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347462376.