OSHA Inspection: WELD-DONE WELDING INC

Issued

2024-08-06 00:00:00

Abate by

2024-09-30 00:00:00

Penalty

Initial $4610.00 · Current $4610.00

General-duty citation text

29 CFR  1910.147(c)(1):The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment was isolated from the energy source and rendered inoperative:  a)Shop Floor: The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections before employees performed any servicing or maintenance, such as but not limited to, changing blades on a DoAll Band Saw Model C-916S. Observed on or about 5/29/24.   NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.

Issued

2024-08-06 00:00:00

Abate by

2024-08-30 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.178(a)(6): The employer did not ensure that all nameplates or markings were maintained in a legible condition:   a)   Outside the Welding shop: The name plate on the YALE   forklift was worn and the information was illegible. This condition was observed on or about May2,2024.   NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.

Issued

2024-08-06 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.178(l)(4)(iii):An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years:  a) Yard: An evaluation of powered industrial truck operator's was not conducted within the past three years. The last evaluation was in 2004. Observed on or about 5/29/24.

Issued

2024-08-06 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.179(j)(2)(iii): A certification record which includes the date of inspection, the signature of the person who performed the inspection and the serial number, or other identifier, of the hook inspected, was not maintained:    a) Welding Shop: Certification inspection records including the date of the inspection, the signature of the person conducting the inspection or identifier of the hook on the SHAW-BOX  5+ CRANE were not maintained.  This condition was observed on or about May 29, 2024.

Issued

2024-08-06 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.179(j)(2)(iv): Monthly inspections of hoist chains, with a certification record which includes the date of inspection, the signature of the person who performed the inspection and an identifier of the chain which was inspected, were not performed:  a) Welding area: Certification inspection records including the date of the inspection, the signature of the person conducting the inspection or identifier of the hoist chain on the  SHAW-BOX  5+ CRANE were not maintained.  This condition was observed on or about May 29,2024.

Issued

2024-08-06 00:00:00

Abate by

2024-08-30 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.179(j)(3): Complete inspections of the crane   did not include the requirements of paragraph (j)(2) of this section:   (a)Welding area: Certification inspection records including the date of the inspection, the signature of the person conducting the inspection or identifier of the crane were not maintained for annual inspections conducted for the SHAW-BOX  5+ CRANE.  This condition was observed on or about May 29,2024.    NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.