HULL, MA —
OSHA Inspection: MG CARPENTRY SERVICES, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of MG CARPENTRY SERVICES, INC. in 121 BAY STREET, HULL, MA 02045 (NAICS 238130). OSHA activity number 347529455.
Where did this inspection happen?
- Establishment
- MG CARPENTRY SERVICES, INC.
- Site address
- 121 BAY STREET
- City
- HULL
- State
- MA
- ZIP
- 02045
- Mailing
- 1253 CONCORD STREET, FRAMINGHAM, MA 01701
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 5
- Ownership type
- A
Citations
6 citations on file for this inspection.
1926.21 B02
- Issued
- Abate by
- Penalty
- Initial $4839.00 · Current $4839.00
General-duty citation text
29 CFR 1926.21(b)(2):The employer did not instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his/her environment to control or eliminate any hazards or other exposure to illness or injury. Location: Worksite On or about June 4, 2024, employees were exposed to fall hazards over 20 feet, as well as to struck-by hazards, where the employer did not instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to the framing activities being performed.
Recent events (1)
- — Z (S) $4839
1926.100 A
- Issued
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1926.100(a):Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets. Location: Worksite On or about June 4, 2024, employees were exposed to struck-by hazards while performing framing activities, where the employer did not ensure that employees were wearing protecting helmets.
Recent events (1)
- — Z (S) $0
1926.102 A01
- Issued
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1926.102(a)(1):The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying objects while using a nail gun. Location: Worksite On or about June 4, 2024, employees were exposed to struck-by hazards from flying debris while performing framing activities, where the employer did not ensure that employees used impact resistant eye protection while working on site, and operating pneumatic nail guns and other tools.
Recent events (1)
- — Z (S) $0
1926.1052 C01
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1926.1052(c)(1):Stairways having four or more risers or rising more than 30 inches (76 cm), whichever is less, were not equipped with at least one handrail and one stairrail system along each unprotected side or edge. Location: Worksite On or about June 4, 2024, employees were exposed to fall hazards, where the employer did not ensure that the stairway from the first floor to the upper level had at least one handrail and one stairrail system along each unprotected edge.
Recent events (1)
- — Z (S) $0
1926.501 B13
- Issued
- Abate by
- Penalty
- Initial $4839.00 · Current $4839.00
General-duty citation text
29 CFR 1926.501(b)(13):Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b). Location: Worksite On or about June 4, 2024, employees were exposed to falls of over 20 feet while performing framing activities on the roof, as well as in multiple other areas with unprotected edges 6 feet or more above lower levels throughout the property, where the employer did not ensure that a guardrail system or other means of fall protection was in place.
Recent events (1)
- — Z (S) $4839
1926.503 A01
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1926.503(a)(1):The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards. Location: Worksite On or about June 4, 2024, employees were exposed to fall hazards of over 20 feet while performing framing activities, where the employer did not ensure that each employee was trained to recognize fall hazards and the procedures to follow to minimize the hazards.
Recent events (1)
- — Z (S) $0
More inspections in this industry (NAICS 238130)
FAIRHOPE, AL—2026-07-16
FRANCISCO ARES
WOODHAVEN, MI—2026-07-16
G.J. PERELLI CO., L.L.C.
PHILADELPHIA, PA—2026-07-16
URUS CONSTRUCTION CORPORATION
BERLIN, NJ—2026-07-16
URUS CONSTRUCTION CORPORATION
MERIDIAN, ID—2026-07-15
TRIPLE R CONSTRUCTION LLC
More inspections in MA
BELLINGHAM, MA—2026-07-16
BELLINGHAM DEPARTMENT OF PUBLIC WORKS
PLYMOUTH, MA—2026-07-15
TECH-ETCH, INC.
WESTFIELD, MA—2026-07-15
BOISE CASCADE BUILDING MATERIALS DISTRIBUTION, L.L.C.
QUINCY, MA—2026-07-15
UNITEDWOR VM CONTRACTOR CORP
FALL RIVER, MA—2026-07-15
CRESCO LABS, INC.
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347529455.