Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: PHOENIX METAL TREATING INC

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of PHOENIX METAL TREATING INC in W190N11350 CARNEGIE DRIVE, GERMANTOWN, WI 53022 (NAICS 331410). OSHA activity number 347543241.

Watch Phoenix Metal Treating INC — free Get an email when a new federal OSHA severe-injury report for Phoenix Metal Treating INC is published. One employer, no account, unsubscribe in one click.
Site address
W190N11350 CARNEGIE DRIVE
City
GERMANTOWN
State
WI
ZIP
53022
Mailing
W190N11350 CARNEGIE DRIVE, GERMANTOWN, WI 53022
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
331410
Employees
8
Ownership type
A

6 citations on file for this inspection.

1910.136 A

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $4839.00 · Current $1500.00 Reduced
29 CFR  1910.136(a): The employer did not ensure that protective footwear is used where employees are exposed to foot injuries due to falling or rolling objects, or objects piercing sole.  (a) On or about June 11, 2024, the employer does not ensure employees who work with metal objects are wearing protective footwear, exposing employees to falling or rolling objects, or objects piercing the sole.
Recent events (2)
  • — I (S) $1500
  • — Z (S) $4839

1910.215 B09

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $3457.00 · Current $1729.00 Reduced
29 CFR  1910.215(b)(9): The employer did not ensure an adjustable tongue guard for the abrasive wheel machinery where an operator stands in front of the machine was installed to allow for adjusting the guard to the constantly decreasing diameter of the wheel. The distance between the wheel periphery and the adjustable tongue guard at the top shall never exceed 1/4-inch.   (a) On or about June 11, 2024, the DeWalt DW756 (serial no. 2019 04 YL81437) was not properly guarded, it lacks the tongue guard on the left and right side of the bench grinder, therefore exposing employees to an amputation.
Recent events (2)
  • — I (S) $1728.5
  • — Z (S) $3457

1910.1200 E01

Serious Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $4839.00 · Current $2420.00 Reduced
29 CFR  1910.1200(e)(1): Employer had not developed or implemented a written hazard communication program that included the requirements outlined in 29 CFR 1910.1200(e)(1)(i) and (e)(1)(ii):   (a) On or about June 11, 2024 the employer did not develop, implement and maintain a written hazard communication program where employees worked with hazardous chemicals including but not limited to: Quench-Kleen 5343, Ammonia, Anhydrous Ammonia, Houghton Quench K, and Perkote 30-266-HF.
Recent events (2)
  • — I (S) $2419.5
  • — Z (S) $4839

1910.1200 F06

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1910.1200(f)(6):The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the product identifier, signal word, hazard statement(s), pictogram(s), precautionary statement(s) and name, address, and telephone number of the chemical manufacturer, importer, or other responsible party.  (a) On or about June 11, 2024, the employer did not ensure all secondary containers of hazardous chemicals were labeled within the facility, such as but not limited to Perkote 30-266-HF (Rust protector).
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 H01

Serious Gravity 10 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1910.1200(h)(1):Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:  (a) On or about June 11, 2024, the employer did not provide Hazard Communication training to employees who were exposed to Quench-Kleen 5343, Ammonia, Anhydrous, Houghton Quench K, and Perkote 30-266-HF, in their workplace and had not received training on health hazards of the chemicals present in the work area.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.178 A06

Other-than-serious 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $388.00 · Current $0.00 Reduced
29 CFR  1910.178(a)(6): The employer did not ensure that all nameplates or markings were maintained in a legible condition:  (a) On or about June 11, 2024, the employer did not ensure that employees using  forklifts to load/unload multiple products were exposed to struck-by hazards in that the Daewoo America, Power Industrial Vehicle (PIV) did not have markings indicating load capacities and other safety warnings.
Recent events (2)
  • — I (O) $0
  • — Z (O) $388

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347543241.