Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: CERWIN HOMES INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of CERWIN HOMES INC. in 12 IRONHORSE TRAIL, DURANGO, CO 81301 (NAICS 236115). OSHA activity number 347589376.

Watch Cerwin Homes INC. — free Get an email when a new federal OSHA severe-injury report for Cerwin Homes INC. is published. One employer, no account, unsubscribe in one click.
Establishment
CERWIN HOMES INC.
Site address
12 IRONHORSE TRAIL
City
DURANGO
State
CO
ZIP
81301
Mailing
1040 MAIN AVE, DURANGO, CO 81301
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236115
Employees
1
Ownership type
A

4 citations on file for this inspection.

1926.451 A06

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $4839.00 · Current $1937.00 Reduced
29 CFR 1926.451(a)(6): Scaffolds were not designed by a qualified person:  (a) 2 Ironhorse Trail, Durango, CO 81301: On or about June 25, 2024, and at times prior, the controlling employer did not ensure that subcontractor employees performed tasks including installing siding and soffits from a mobile scaffolding platform which was designed by a qualified person. This condition exposed employees to a fall hazard in excess of 16 feet.
Recent events (2)
  • — I (S) $1937
  • — Z (S) $4839

1926.451 C02 IV

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $4839.00 · Current $1937.00 Reduced
29 CFR 1926.451(c)(2)(iv): Front-end loaders and similar pieces of equipment were used to support scaffold platforms when they were not specifically designed by the manufacturer for such use:  (a) 2 Ironhorse Trail, Durango, CO 81301: On or about June 25, 2024, and at times prior, a Terex Handler [SN 7799] was used to support scaffold platforms used by subcontractor employees to install siding and soffit. The controlling employer did not ensure that the Terex Handler was designed to support scaffold platforms.  This condition exposed employees to a fall hazard in excess of 16 feet and crushed-by hazards.
Recent events (2)
  • — I (S) $1937
  • — Z (S) $4839

1926.451 C02 V

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.451(c)(2)(v): Fork-lifts were used to support scaffold platforms while the entire platform was not attached to the fork and the fork-lift was moved horizontally while the platform was occupied:  (a) 2 Ironhorse Trail, Durango, CO 81301: On or about June 25, 2024, and at times prior, the controlling employer did not ensure that the job-built scaffolding platform attached to a Terex Handler [SN 7799] all-terrain forklift was fully supported. This condition exposed subcontractor employees to a fall hazard in excess of 16 feet and crushed-by hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.451 G01

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $4839.00 · Current $1936.00 Reduced
29 CFR 1926.451(g)(1): Employees on scaffolds more than 10 feet (3.1 m) above a lower level were not protected from falling to that lower level by fall protection established in paragraphs (g)(1)(i)-(vii) of this section:  (a) 2 Ironhorse Trail, Durango, CO 81301: On or about June 25, 2024, and at times prior, the controlling employer did not ensure that subcontractor employees working on a scaffold platform were protected from falling to the ground by fall protection methods established in this standard. This condition exposed employees to a fall hazard in excess of 16 feet.
Recent events (2)
  • — I (S) $1936
  • — Z (S) $4839

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347589376.