Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: GUY TUCKER

Unprogrammed Other inspection · Safety discipline

On , OSHA opened an unprogrammed Other safety inspection of GUY TUCKER in 22511 STEARMAN WAY, TANNER, AL 35671 (NAICS 236220). OSHA activity number 347595407.

Watch GUY Tucker — free Get an email when a new federal OSHA severe-injury report for GUY Tucker is published. One employer, no account, unsubscribe in one click.
Establishment
GUY TUCKER
Site address
22511 STEARMAN WAY
City
TANNER
State
AL
ZIP
35671
Mailing
215 CONSTITUTION DRIVE, MERIDIANVILLE, AL 35759
Inspection type
Unprogrammed Other (I)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
236220
Employees
8
Ownership type
A

3 citations on file for this inspection.

1926.602 C01 VII

Serious Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $4839.00 · Current $4839.00
29 CFR  1926.602(c)(1)(vii):Unauthorized persons were allowed to ride on a powered industrial truck:  a.) On or about 06/12/2024, at 22511 Stearman Way, Tanner, AL; the employer exposed employees to fall hazards, in that employees were riding in a basket attached to the forks of the powered industrial truck.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (S) $4839
  • — Z (S) $4839

1926.760 A01

Serious Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $4839.00 · Current $4839.00
29 CFR  1926.760(a)(1):Each employee engaged in a steel erection activity who is on a walking/working surface with an unprotected side or edge more than 15 feet (4.6 m) above a lower level was not protected from fall hazards by guardrail systems, safety net systems, personal fall arrest systems, positioning device systems, or fall restraint systems.  a.) On or about 06/12/2024, at 22511 Stearman Way, Tanner, AL; the employer exposed employees to fall hazards in that employees were not required to wear fall protection when erecting a steel frame structure at heights of approximately 30-feet.   In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (S) $4839
  • — Z (S) $4839

1926.761 B

Serious Gravity 10 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $4839.00 · Current $4839.00
29 CFR  1926.761(b):The employer did not train each employee exposed to a fall hazard in accordance with the requirements of 29 CFR 1926.761:  a.) On or about 06/12/2024, at 22511 Stearman Way, Tanner, AL; the employer exposed employees to fall hazards, in that employees were not trained to recognize hazards with erecting a steel frame structure at heights of approximately 30-feet.   In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (S) $4839
  • — Z (S) $4839

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347595407.