Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: THE MAC GROUP LLC

Unprogrammed Other inspection · Health discipline

On , OSHA opened an unprogrammed Other health inspection of THE MAC GROUP LLC in 5100 DENALI DRIVE, STONE MOUNTAIN, GA 30087 (NAICS 238140). OSHA activity number 347601478.

Watch THE MAC Group LLC — free Get an email when a new federal OSHA severe-injury report for THE MAC Group LLC is published. One employer, no account, unsubscribe in one click.
Establishment
THE MAC GROUP LLC
Site address
5100 DENALI DRIVE
City
STONE MOUNTAIN
State
GA
ZIP
30087
Mailing
1800 SANDY PLAINS INDUSTRIAL PARKWAY BLDG #306, MARIETTA, GA 30066
Inspection type
Unprogrammed Other (I)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238140
Employees
5
Ownership type
A

4 citations on file for this inspection.

1926.102 A01

Serious Gravity 1 2 instances 5 exposed
Issued
Penalty
Initial $2074.00 · Current $1037.00 Reduced
29 CFR  1926.102(a)(1):The employer did not ensure employees used eye and face protection equipment when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents:  a) New residential construction: On 7/8/2024, the employer exposed employees to struck-by hazards while using Coosa Portland Cement in that no eye protection was not provided to employees.  b) New residential construction: On 7/8/2024, the employer exposed employees to struck-by hazards while operating DeWalt Chop Saw and Ryobi Circular Saw in that no eye protection was not provided to employees operating these tools.
Recent events (2)
  • — I (S) $1037
  • — Z (S) $2074

1926.304 D

Serious Gravity 5 1 instance 1 exposed
Issued
Penalty
Initial $2765.00 · Current $1383.00 Reduced
29 CFR  1926.304(d): Portable, power-driven circular saw(s) were not equipped with a guard above and below the base plate or shoe:  a) At the new residential construction: On 7/8/2024, the employer exposed employees to severe lacerations and/or amputation hazards, in that DeWalt Chop Saw's spark guard was not operational during use as a piece of cloth was used to keep the spark guard back exposing the blade.
Recent events (2)
  • — I (S) $1382.5
  • — Z (S) $2765

1926.1153 C01

Serious Gravity 10 1 instance 5 exposed
Issued
Penalty
Initial $4839.00 · Current $2420.00 Reduced
29 CFR 1926.1153(c)(1): Specified exposure control methods. For each employee engaged in a task identified on Table 1, the employer shall fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1, unless the employer assesses and limits the exposure of the employee to respirable crystalline silica in accordance with paragraph (d) of this section.  a) New residential construction: On 7/8/2024, the employer exposed employees to respiratory hazards due to silica exposure from dry cutting stone pavers without any engineering controls, work practices, or respiratory protection as described in Table-1. The employer failed to enforce the use of a saw that is accompanied for wet cutting.
Recent events (2)
  • — I (S) $2419.5
  • — Z (S) $4839

1926.1153 D02 I

Serious Gravity 10 1 instance 3 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.1153(d)(2)(i): The employer did not assess the exposure of each employee who was or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2)(ii) or the scheduled monitoring option in paragraph (d)(2)(iii) of this section:  a) New residential construction: On 7/8/2024, the employer did not assess all employees who may be exposed to silica health hazards through monitoring to ensure they are not over exposed.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347601478.