Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: ALLSTATE TOOL & DIE INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of ALLSTATE TOOL & DIE INC. in 15 COLD WATER CRESCENT, ROCHESTER, NY 14624 (NAICS 332721). OSHA activity number 347641417.

Watch Allstate Tool & DIE INC. — free Get an email when a new federal OSHA severe-injury report for Allstate Tool & DIE INC. is published. One employer, no account, unsubscribe in one click.
Site address
15 COLD WATER CRESCENT
City
ROCHESTER
State
NY
ZIP
14624
Mailing
15 COLD WATER CRESCENT, ROCHESTER, NY 14624
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332721
Employees
40
Ownership type
A

3 citations on file for this inspection.

1910.147 C04 I

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $4839.00 · Current $2500.00 Reduced
29 CFR  1910.147(c)(4)(i):Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:  a) On or about 07/25/2024, in the Shipping/Receiving area; Employees were exposed to the unexpected startup of equipment when Lockout/tagout (LOTO) procedures were not developed, documented and utilized when performing servicing and maintenance such as, but not limited to, changing blades on Cosen C-420NC Bandsaw.   ABATEMENT DOCUMENTATION REQUIRED.
Recent events (2)
  • — I (S) $2500
  • — Z (S) $4839

1910.242 B

Serious Gravity 1 2 instances 2 exposed
Issued
Abate by
Penalty
Initial $3629.00 · Current $2500.00 Reduced
29 CFR  1910.242(b):Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.:  a) On or about 07/25/2024, in the tool room; Employees were exposed to flying debris when compressed air was used for cleaning with PSI >40.  b) On or about 07/25/2024, in the Shipping/Receiving area;  Employees were exposed to flying debris when compressed was used to cleaning with PSI >80.  ABATEMENT CERTIFICATION REQUIRED.
Recent events (2)
  • — I (S) $2500
  • — Z (S) $3629

1904.41 A02

Other-than-serious 1 instance 50 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1904.41(a)(2): Annual electronic submission of OSHA Form 300A Summary of Work-Related Injuries and Illnesses by establishments with 20 or more employees but fewer than 250 employees in designated industries. If your establishment had 20 or more employees but fewer than 250 employees at any time during the previous calendar year, and your establishment is classified in an industry listed in appendix A to subpart E of this part, then you must electronically submit information from OSHA Form 300A Summary of Work-Related Injuries and Illnesses to OSHA or OSHA's designee. You must submit the information once a year, no later than the date listed in paragraph (c) of this section of the year after the calendar year covered by the form:  a) On or about 07/25/2024; the employer failed during the calendar year 2023, to electronically submit information from their OSHA Form 300A or equivalent by 03/02/2024. The establishment employed 50 employees and is classified as 332700 during the calendar year 2023.   ABATEMENT CERTIFICATION REQUIRED.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347641417.