PATERSON, NJ —
OSHA Inspection: SPRINT DISTRIBUTION SERVICES LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of SPRINT DISTRIBUTION SERVICES LLC in 178 KEEN STREET, PATERSON, NJ 07524 (NAICS 336413). OSHA activity number 347656530.
Where did this inspection happen?
- Establishment
- SPRINT DISTRIBUTION SERVICES LLC
- Site address
- 178 KEEN STREET
- City
- PATERSON
- State
- NJ
- ZIP
- 07524
- Mailing
- 178 KEEN STREET, PATERSON, NJ 07524
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336413
- Employees
- 24
- Ownership type
- A
Citations
8 citations on file for this inspection.
1910.37 A03
- Issued
- Penalty
- Initial $6620.00 · Current $4703.00 Reduced
General-duty citation text
29 CFR 1910.37(a)(3): Exit routes were not free and/or unobstructed. No materials or equipment may be placed, either permanently or temporarily, within the exit route. a) Paterson Facility: Exit route was no free and unobstructed. Exit was blocked by pallets from the outside and material, garbage on the inside, on or about 7/30/24. b) Paterson Facility: Exit route was not accessible as it was being blocked by a metal rolling gate, on or about 7/30/24. c) Passaic Facility Building # 13 storage 3rd floor: Exit door was being block with merchandise, on or about 10/3024.
Recent events (2)
- — I (S) $4703
- — Z (S) $6620
1910.110 E04 III
- Issued
- Penalty
- Initial $3783.00 · Current $2059.00 Reduced
General-duty citation text
29 CFR 1910.110(e)(4)(iii): LP gas container(s) installed on internal combustion engine vehicles were not securely mounted to prevent jarring loose, slipping or rotating: a) Paterson facility, Mitsubishi forklift. LP gas container was not securely mounted to prevent jarring loose. The LP gas was not installed on the index pin, on or about 7/30/24. b) Passaic facility, TOYOTA forklift: LP gas container was not securely mounted to prevent jarring loose. The LP gas was not installed on the index pin and the secure strap was wedge with a piece of cardboard, on or about 10/30/24.
Recent events (2)
- — I (O) $2059
- — Z (S) $3783
1910.110 F06 II
- Issued
- Penalty
- Initial $3783.00 · Current $2459.00 Reduced
General-duty citation text
29 CFR 1910.110(f)(6)(ii): LP-gas containers were not in a suitable enclosure or otherwise protected against tampering: a) Facility-outside: Full LP Gas- containers were not in a suitable enclosure to prevent to prevent against tampering, on or about 7/30/24.
Recent events (2)
- — I (S) $2459
- — Z (S) $3783
1910.176 A
- Issued
- Penalty
- Initial $5675.00 · Current $3689.00 Reduced
General-duty citation text
29 CFR 1910.176(a): Where mechanical handling equipment is used, sufficient safe clearances were not provided in aisle ways. Aisles and passageways were not kept clear with no obstructions across or in aisles creating a hazard. a) Facility: Aisles were not kept clear where mechanical handling equipment was use, on or about 7/30/24.
Recent events (2)
- — I (S) $3688.75
- — Z (S) $5675
1910.178 L01 II
- Issued
- Penalty
- Initial $5675.00 · Current $3689.00 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(ii): The employer did not ensure that each operator had successfully completed the training required by paragraph (l), except as permitted by paragraph (l)(5), prior to permitting an employee to operate a powered industrial truck. a) Passaic Facility: The employer did not ensure that each operator had successfully completed the forklift training prior to permitting an employee to operate a powered industrial truck. Employees were observed operating a Powered Industrial Trucks without successfully completing forklift training, on or about 7/30/24. b) Passaic Facility: The employer did not ensure that each operator had successfully completed the forklift training prior to permitting an employee to operate a powered industrial truck. Employees were observed operating a Powered Industrial Trucks without successfully completing forklift training, on or about 7/30/24.
Recent events (2)
- — I (S) $3688.75
- — Z (S) $5675
1910.303 B07 I
- Issued
- Abate by
- Penalty
- Initial $5675.00 · Current $3689.00 Reduced
General-duty citation text
29 CFR 1910.303(b)(7)(i): Unused openings in boxes, raceways, auxiliary gutters, cabinets, equipment cases, or housings were not effectively closed to afford protection substantially equivalent to the wall of the equipment. a) Facility: Employees were exposed to electrical hazards while knockout fittings were not provided in panel boxes, on or about 7/30/24. b) Facility Panel box: Employees were exposed to electrical hazards while breaker was missing in the panel boxes, on or about 7/30/24.
Recent events (2)
- — I (S) $3688.75
- — Z (S) $5675
1910.305 G01 IV
- Issued
- Penalty
- Initial $5675.00 · Current $3689.00 Reduced
General-duty citation text
29 CFR 1910.305(g)(1)(iv): Flexible cords and/ or cables were used for purposes prohibited by paragraphs (A) through (F) of 29 CFR 1910.305(g)(1)(iv) a) Building Interior: Employees were using flexible cords as a substitute for the fixed wiring of a structure to power the different equipment, on or about 7/30/24
Recent events (2)
- — I (S) $3688.75
- — Z (S) $5675
1904.29 B01
- Issued
- Abate by
- Penalty
- Initial $946.00 · Current $615.00 Reduced
General-duty citation text
29 CFR 1904.29(b)(1): A Log of all recordable work-related injuries and illnesses (OSHA Form 300 or equivalent) was not completed in the detail as required by the regulation: a) At the facility, 178 Keen Street, Paterson, NJ - Building Office: A Log of all recordable work-related injuries and illnesses (OSHA Form 300 or equivalent) was not complete by 7/30/24.
Recent events (2)
- — I (O) $615
- — Z (O) $946
More inspections in this industry (NAICS 336413)
WOODS CROSS, UT—2026-07-16
MATCO MANUFACTURING
NORTH HOLLYWOOD, CA—2026-07-08
AVIBANK MANUFACTURING, INC
SALT LAKE CITY, UT—2026-07-08
NAMMO COMPOSITE SOLUTIONS
SALT LAKE CITY, UT—2026-07-02
BOEING COMPANY
TACOMA, WA—2026-07-01
WA317991845 - PRECISION MACHINE WORKS INC
More inspections in NJ
PERTH AMBOY, NJ—2026-07-16
ENGLERT INC.
RIDGEFIELD, NJ—2026-07-16
COLORITE PLASTICS COMPANY
BERLIN, NJ—2026-07-16
URUS CONSTRUCTION CORPORATION
GLASSBORO, NJ—2026-07-15
GLASSBORO WATER & SEWER DEPARTMENT
FLANDERS, NJ—2026-07-15
TRI-STATE QUIKRETE
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347656530.