OSHA Inspection: DILIGENT INNOVATION FABRICATION AND MACHINE, INC.

Issued

2024-12-09 00:00:00

Abate by

2025-01-06 00:00:00

Penalty

Initial $2765.00 · Current $1383.00 Reduced

General-duty citation text

29 CFR  1910.132(f)(1): The employer did not provide training to each employee who is required by this section to use personal protective equipment:  a.  On or�about August 5, 2024,�in the�facility, employees�were not�trained to�know at�least the�following:    1.  What PPE is necessary.   2.  When PPE is necessary.  3.  How to properly don, doff, adjust and wear the PPE. 4. The limitations of PPE.  5.  The proper care, maintenance useful life and disposal of the PPE.    Employee exposure included, but was not limited to, burn hazards from welding and cutting operations.

Issued

2024-12-09 00:00:00

Abate by

2025-01-06 00:00:00

Penalty

Initial $2765.00 · Current $1383.00 Reduced

General-duty citation text

29 CFR  1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:  a) On or about August 5, 2024, in the facility, employees had not been trained with effective information on hazardous chemicals in their work areas such as, but not limited to, welding fumes, acetylene and hexavalent chrome.

Issued

2024-12-09 00:00:00

Abate by

2025-01-06 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.132(d)(2): The employer did not verify, through a written certification, the identity of the workplace evaluated, the person certifying that the evaluation had been performed, and the date the hazard assessment was done:  a.  On or about August 5, 2024, in the facility, the�employer had�not conducted�a personal�protective equipment�assessment, which�included the�identity of�the workplace�evaluated, the�person who�conducted the�evaluation and�the date�of the�hazard assessment.��Employee exposure�included, but�was not�limited to, welding burns and sharp edges.