CLANTON, AL —
OSHA Inspection: FOLEY PRODUCTS COMPANY, LLC
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of FOLEY PRODUCTS COMPANY, LLC in 1091 SCOTT DRIVE, CLANTON, AL 35045 (NAICS 327332). OSHA activity number 347842171.
Watch Foley Products Company, LLC — free
Get an email when a new federal OSHA severe-injury report for Foley Products Company, LLC is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- FOLEY PRODUCTS COMPANY, LLC
- Site address
- 1091 SCOTT DRIVE
- City
- CLANTON
- State
- AL
- ZIP
- 35045
- Mailing
- 1091 SCOTT DRIVE, CLANTON, AL 35045
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327332
- Employees
- 30
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.1053 D04
- Issued
- Abate by
- Penalty
- Initial $13005.00 · Current $0.00 Reduced
9000
General-duty citation text
29 CFR 1910.1053(d)(4): The employer did not reassess exposures whenever a change in the production, process, control equipment, personnel, or work practices was reasonably expected to result in new or additional exposures at or above the action level, or when the employer had reason to believe that new or additional exposures at or above the action level have occurred: a) Cement Mixer #1 (pipe side); October 22, 2024, and at times prior thereto, the employer failed to assess the employee cleaning the new cement mixer to determine their 8-hour TWA exposure. An employee using a jackhammer/chipping tool to remove concrete from mixer #1 was exposed to respirable crystalline silica hazards at 41.69 micrograms per cubic meter which is approximately 1.66 times the Action Level (AL) of 25 micrograms per cubic meter, and the employer did not perform monitoring of the job task or work area after the previous mixer of a different configuration was replaced. Results were based on a 508-minute sampling period.
Recent events (2)
- — I (S) $0
- — Z (S) $13005
1910.1053 F02 I
- Issued
- Abate by
- Penalty
- Initial $65027.00 · Current $32514.00 Reduced
9000
General-duty citation text
29 CFR 1910.1053(f)(2)(i): The employer did not establish and implement a written exposure control plan: a) Cement Mixer #1 (pipe side); October 22, 2024, and at times prior to the employer exposed employees to hazards associated with respirable crystalline silica in that the employer did not develop or implement a written exposure control plan meeting the requirements of 1910.1053(f)(2)(i)(A)-(C) to limit employee exposure to respirable crystalline silica. Foley Products Company, LLC was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.1053(f)(2)(i), which was contained in OSHA inspection number 1518033, citation number 1, item number 1b and was affirmed as a final order on August 23, 2021, with respect to a workplace located at 1091 Scott Dr, Clanton AL, 35045.
Recent events (2)
- — I (R) $32513.5
- — Z (R) $65027
1910.1053 I01 I
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
9000
General-duty citation text
29 CFR 1910.1053(i)(1)(i): The employer did not make medical surveillance available at no cost to each employee, and at a reasonable time and place, for each employee who has been occupationally exposed to respirable crystalline silica at or above the action level for 30 or more days per year: a) Cement Mixer #1 (pipe side); October 22, 2024, and at times prior thereto, the employer did not make medical surveillance available at no cost to each employee, and at a reasonable time and place, for each employee who has been occupationally exposed to respirable crystalline silica at or above the action level for 30 or more days per year. An employee using a jackhammer/chipping tool to remove concrete from mixer #1 was exposed to respirable crystalline silica hazards at 41.69 micrograms per cubic meter which is approximately 1.66 times the Action Level (AL) of 25 micrograms per cubic meter. Results were based on a 508-minute sampling period. Foley Products Company, LLC was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.1053(f)(2)(i), which was contained in OSHA inspection number 1518033, citation number 1, item number 1c and was affirmed as a final order on August 23, 2021, with respect to a workplace located at 1091 Scott Dr, Clanton AL, 35045.
Recent events (2)
- — I (R) $0
- — Z (R) $0
1910.1053 J03 I
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
9000
General-duty citation text
29 CFR 1910.1053(j)(3)(i): 29 CFR 1910.1053(j)(3)(i): The employer did not ensure that each employee covered by this section could demonstrate knowledge and understanding of the following: (A) the health hazards associated with exposure to respirable crystalline silica; (B) specific tasks in the workplace that could result in exposure to respirable crystalline silica; (C) specific measures the employer has implemented to protect employees from exposure to respirable crystalline silica, including engineering controls, work practices, and respirators to be used; (D) the contents of this section; and, (E) the purpose and a description of the medical surveillance program required by paragraph (i) of this section: a) Cement Mixer #1 (pipe side); October 22, 2024, and at times prior thereto, the employer did not provide effective training on silica for the employee cleaning the cement mixer. An employee using a jackhammer/chipping tool to remove concrete from mixer #1 was exposed to respirable crystalline silica hazards at 41.69 micrograms per cubic meter which is approximately 1.66 times the Action Level (AL) of 25 micrograms per cubic meter. Results were based on a 508-minute sampling period. Foley Products Company, LLC was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.1053(f)(2)(i), which was contained in OSHA inspection number 1518033, citation number 1, item number 1e and was affirmed as a final order on August 23, 2021, with respect to a workplace located at 1091 Scott Dr, Clanton AL, 35045.
Recent events (2)
- — I (R) $0
- — Z (R) $0
1910.1053 J01
- Issued
- Abate by
- Penalty
- Initial $519.00 · Current $260.00 Reduced
9000
General-duty citation text
29 CFR 1910.1053(j)(1): The employer did not include respirable crystalline silica in the program established to comply with the hazard communication standard (HCS) (29 CFR 1910.1200): a) Cement Mixer #1 (pipe side); October 22, 2024, and at times prior to the employer the employer did not establish a hazard communication program that included a section on respirable crystalline silica. Foley Products Company, LLC was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.1053(f)(2)(i), which was contained in OSHA inspection number 1518033, citation number 1, item number 1d and was affirmed as a final order on August 23, 2021, with respect to a workplace located at 1091 Scott Dr, Clanton AL, 35045.
Recent events (2)
- — I (R) $259.5
- — Z (R) $519
1910.147 C04 II B
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.147(c)(4)(ii)(B): The energy control procedures did not clearly and specifically outline the steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy. a) Cement mixer #2 (Box area); On or about October 21, 2024, and at times prior thereto the employer failed to ensure written procedures for the cement mixer had clear and specific steps for isolating, securing, and verifying all energy sources including electric, water and air.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1053 K01 I
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
9000
General-duty citation text
29 CFR 1910.1053(k)(1)(i): The employer did not make and maintain an accurate record of all exposure measurements taken to assess employee exposure to respirable crystalline silica, as prescribed in paragraph (d) of this section: a) Facility; October 22, 2024, and at times prior to, the employer did not maintain sampling records for monitoring of respirable crystalline silica performed on 8/27/2021 in the facility
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at FOLEY PRODUCTS COMPANY, LLC
CANTONMENT, FL—2025-05-06
FOLEY PRODUCTS COMPANY, LLC
WINDER, GA—2024-01-23 00:00:00
FOLEY PRODUCTS COMPANY, LLC
CANTONMENT, FL—2023-03-16 00:00:00
FOLEY PRODUCTS COMPANY, LLC
CHATTANOOGA, TN—2023-01-12 00:00:00
FOLEY PRODUCTS COMPANY, LLC
View FOLEY PRODUCTS COMPANY, LLC's full OSHA safety record →
More inspections in this industry (NAICS 327332)
BILLINGS, MT—2026-05-18
RINKER MATERIALS LLC
ATLANTIC BEACH, FL—2026-05-05
NEW SOUTH CONSTRUCTION
SPOKANE, WA—2026-05-04
WA317991042 - SPOKANE WILBERT VAULT CO
SPOKANE, WA—2026-04-06
WA317990611 - SPOKANE WILBERT VAULT CO
GREENFIELD, IN—2026-02-18
RINKER MATERIALS
More inspections in AL
CLANTON, AL—2026-07-13
UBIQUE TECHNOLOGIES, INC.
IRONDALE, AL—2026-07-13
FATHER NATURE LANDSCAPES OF BIRMINGHAM, INC.
GARDENDALE, AL—2026-07-09
ANDINO'S IRON WORKERS, LLC
CULLMAN, AL—2026-07-09
ALFREDO PICHARDO BLANCO
MOBILE, AL—2026-07-09
FLEXICREW TECHNICAL, LLC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347842171.