Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: FOX FRAMING LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of FOX FRAMING LLC in CORNER OF TEMPSTORD WAY AND ESCALANTE DR., EAGLE, ID 83616 (NAICS 238130). OSHA activity number 347861494.

Watch FOX Framing LLC — free Get an email when a new federal OSHA severe-injury report for FOX Framing LLC is published. One employer, no account, unsubscribe in one click.
Establishment
FOX FRAMING LLC
Site address
CORNER OF TEMPSTORD WAY AND ESCALANTE DR.
City
EAGLE
State
ID
ZIP
83616
Mailing
992 W IDAHO AVE., MERIDIAN, ID 83642
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
3
Ownership type
A

5 citations on file for this inspection.

1926.100 A

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2765.00 · Current $1383.00 Reduced
29 CFR  1926.100(a):Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets:  (a) On November 5th, 2024 employees were exposed to head injuries while working on the ground below framers on the roof.  Abatement Note: Abatement certification is required for this item. See enclosed "Certification of Corrective Actions Worksheet."
Recent events (2)
  • — I (S) $1382.5
  • — Z (S) $2765

1926.102 A01

Serious Gravity 1 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2074.00 · Current $0.00 Reduced
29 CFR  1926.102(a)(1):The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.  a) On November 5th, 2024 and times prior, employees using a pneumatic nail gun to install roofing material were not wearing eye protection.  Abatement Note: Abatement certification is required for this item. See enclosed "Certification of Corrective Actions Worksheet."
Recent events (2)
  • — I (S) $0
  • — Z (S) $2074

1926.501 B13

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $4839.00 · Current $2420.00 Reduced
29 CFR  1926.501(b)(13):Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):   (a) On November 5th, 2024, employees were exposed to falls between 10 and 21 feet to the ground below while performing framing activities.   Abatement Note: Abatement certification and documentation is required for this item. See enclosed "Certification of Corrective Actions Worksheet."
Recent events (2)
  • — I (S) $2419.5
  • — Z (S) $4839

1926.1053 B01

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $4148.00 · Current $2074.00 Reduced
29 CFR  1926.1053(b)(1): Where portable ladders were used for access to an upper landing surface and the ladder's length allows, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed:  (a) On November 5th, 2024, employees working on the roof of a new single-family building were using an A-frame lean safe ladder to access and exit the roof. The ladder was positioned below the access point by at least 2.5 feet.   Abatement Note: Abatement certification is required for this item. See enclosed "Certification of Corrective Actions Worksheet."
Recent events (2)
  • — I (S) $2074
  • — Z (S) $4148

1926.1053 B13

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1926.1053(b)(13):The top or step of a stepladder was used as a step:  (a) On November 5, 2024, employees used the top step of an A-frame lean safe ladder to access and exit the roof and work area.   Abatement Note: Abatement certification is required for this item. See enclosed "Certification of Corrective Actions Worksheet."
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View FOX FRAMING LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347861494.