Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,214Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: SERRANO EXTERIORS PLLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of SERRANO EXTERIORS PLLC in 2503 WAUKEGAN AVE., BANNOCKBURN, IL 60015 (NAICS 238160). OSHA activity number 347937682.

Watch Serrano Exteriors Pllc — free Get an email when a new federal OSHA severe-injury report for Serrano Exteriors Pllc is published. One employer, no account, unsubscribe in one click.
Site address
2503 WAUKEGAN AVE.
City
BANNOCKBURN
State
IL
ZIP
60015
Mailing
704 LOGAN AVE., #6, MCHENRY, IL 60050
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
238160
Employees
6
Ownership type
A

6 citations on file for this inspection.

1926.100 A

Serious Gravity 5 3 instances 3 exposed
Issued
Penalty
Initial $2837.00 · Current $1400.00 Reduced
29 CFR 1926.100(a): Employees were not protected by protective helmets while working in areas where there was a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns:    a) On or about December 16, 2024, employees were exposed to head injury while working without protective helmets in areas adjacent to and below roofing work activities.    No abatement certification or documentation required for this violation.
Recent events (2)
  • — I (S) $1400
  • — Z (S) $2837

1926.252 A

Serious Gravity 5 3 instances 3 exposed
Issued
Penalty
Initial $2837.00 · Current $1400.00 Reduced
29 CFR 1926.252(a): An enclosed chute of wood, or equivalent material, was not used where materials were dropped more than 20 feet to points lying outside the exterior walls of the building(s):    a) On or about December 16, 2024, employees were exposed to the hazard of being struck by materials and debris that was being thrown from the roof deck at an elevation of approximately 28 feet where an enclosed chute or equivalent was not provided.   No abatement certification or documentation required for this violation.
Recent events (2)
  • — I (S) $1400
  • — Z (S) $2837

1926.501 B11

Serious Gravity 10 4 instances 4 exposed
Issued
Penalty
Initial $4965.00 · Current $2500.00 Reduced
29 CFR  1926.501(b)(11): Each employee on a steep roof with unprotected sides and edges 6 feet (1.8 m) or more above lower levels was not protected from falling by guardrail systems with toeboards, safety net systems, or personal fall arrest systems:   a) On or about December 16, 2024, employees were exposed to the hazard of falling approximately 28 feet while working without fall protection from a pitched roof.  No abatement certification or documentation required for this violation.
Recent events (2)
  • — I (S) $2500
  • — Z (S) $4965

1926.502 D06 I

Serious Gravity 10 2 instances 2 exposed
Issued
Penalty
Initial $4965.00 · Current $2500.00 Reduced
29 CFR 1926.502(d)(6)(i): Snaphooks were engaged directly to webbing, rope or wire rope:  a) On or about December 16, 2024, snaphooks were connected to the nylon webbing of body harnesses used for fall protection on pitched roof surfaces.  No abatement certification or documentation required for this violation.
Recent events (2)
  • — I (S) $2500
  • — Z (S) $4965

1926.502 D17

Serious Gravity 10 2 instances 2 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.502(d)(17): The attachment point of the body harness was not located in the center of the wearer's back near shoulder level, or above the wearer's head:    a) On or about December 16, 2024, the front nylon straps of body harnesses were used as attachment points for fall protection on pitched roof surfaces.    No abatement certification or documentation required for this violation.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.502 D15

Other-than-serious 2 instances 2 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.502(d)(15): Anchorage used for attachment for personal fall arrest equipment was not capable of supporting at least 5,000 pounds (22.2 kN) per employee attached nor was it designed, installed and used as follows: As part of a complete personal fall arrest system which maintains a safety factor of at least two; and under the supervision of a qualified person:      a) On or about December 16, 2024, a ridge anchor used as part of a fall protection system was not connected completely to the ridge to ensure the device would be capable of supporting at least 5,000 pounds of force.      No abatement certification or documentation required for this violation.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347937682.