Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

HURON, SD —

OSHA Inspection: HURON WELDING, LLC

Unprogrammed Related inspection · Safety discipline

At a glance

On , OSHA opened an unprogrammed Related safety inspection of HURON WELDING, LLC in 688 DAKOTA AVENUE SOUTH, HURON, SD 57350 (NAICS 237310). OSHA activity number 347959280.

Watch Huron Welding, LLC — free Get an email when a new federal OSHA severe-injury report for Huron Welding, LLC is published. One employer, no account, unsubscribe in one click.

Where did this inspection happen?

Establishment
HURON WELDING, LLC
Site address
688 DAKOTA AVENUE SOUTH
City
HURON
State
SD
ZIP
57350
Mailing
550 NEVADA AVENUE SOUTHWEST, HURON, SD 57350

What kind of inspection was it?

Inspection type
Unprogrammed Related (G)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B

When did the case open and close?

Opened
Closing conference
Case closed
Last modified
Data loaded

Establishment context

NAICS code
237310
Employees
5
Ownership type
A

Citations

5 citations on file for this inspection.

1926.251 A06

Deleted Serious Gravity 1 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $2128.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1926.251(a)(6): The employer did not ensure each day before being used, and during use, where service conditions warrant, the sling and all fastenings and attachments were inspected for damage or defects by a competent person, and damaged or defective slings were not immediately removed from service:  (a)Huron Welding, LLC at 688 Dakota Avenue South, Huron, SD 57350: On or about and at times prior to January 3, 2025, the employer did not ensure a competent person conducted a visual inspection prior to each shift covering the Lift-It synthetic lifting strap, Model Number RS30W, Serial Number 199012-138. This condition exposed employees to struck-by hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2128

1926.1427 A

Serious Gravity 5 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $4256.00 · Current $2128.00 Reduced

General-duty citation text

29 CFR 1926.1427(a): General requirements for operators. The employer did not ensure that each operator is trained, certified/ licensed, and evaluated in accordance with this section before operating any equipment covered under subpart CC, except for the equipment listed in paragraph (a)(2) of this section:  (a)Huron Welding, LLC at 688 Dakota Avenue South, Huron, SD 57350: On or about and at times prior to January 2, 2025, the employer did not ensure that the operator of the Terex Hydraulic Mobile Crane, Model Number: RT230, Serial Number: 11456, was trained, certified/licensed, and evaluated prior to operating the Terex mobile crane.  This condition exposed employees to struck-by hazards.
Recent events (2)
  • — I (S) $2128
  • — Z (S) $4256

1926.1412 D01

Serious Gravity 5 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1926.1412(d)(1): The employer did not ensure that a competent person conducted a visual inspection prior to each shift on the equipment that will be used:  (a)Huron Welding, LLC at 688 Dakota Avenue South, Huron, SD 57350: On or about and at times prior to January 2, 2025, the employer did not ensure a competent person conducted a visual inspection prior to each shift covering the Terex Hydraulic Mobile Crane, Model Number: RT230, Serial Number: 11456. This condition exposed employees to struck-by hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.1412 E03 I

Serious Gravity 5 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1926.1412(e)(3)(i): Monthly inspections were not documented and maintained by the employer that conducts the inspection:   (a)Huron Welding, LLC at 688 Dakota Avenue South, Huron, SD 57350: On or about and at times prior to January 2, 2025, the employer did not ensure a competent person conducted and documented monthly inspections covering the Terex Hydraulic Mobile Crane, Model Number: RT230, Serial Number: 11456. This condition exposed employees to struck-by hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.1412 F01

Serious Gravity 5 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1926.1412(f)(1): The equipment was not inspected at least every 12 months by a qualified person in accordance with paragraph (d) of this section:  (a)Huron Welding, LLC at 688 Dakota Avenue South, Huron, SD 57350: On or about and at times prior to January 2, 2025, the creating employer did not ensure a qualified person conducted an annual inspection every 12 months covering the Terex Hydraulic Mobile Crane, Model Number: RT230, Serial Number: 11456. This condition exposed employees to struck-by hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

More inspections in this industry (NAICS 237310)

More inspections in SD

Source

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347959280.