Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,214Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

BURNSVILLE, MS —

OSHA Inspection: TRAXYS PROCESSING INC

Federal Agency inspection · Safety discipline

At a glance

On , OSHA opened a federal Agency safety inspection of TRAXYS PROCESSING INC in 87 COUNTY ROAD 210, BURNSVILLE, MS 38833 (NAICS 332999). OSHA activity number 348043605.

Watch Traxys Processing INC — free Get an email when a new federal OSHA severe-injury report for Traxys Processing INC is published. One employer, no account, unsubscribe in one click.

Where did this inspection happen?

Establishment
TRAXYS PROCESSING INC
Site address
87 COUNTY ROAD 210
City
BURNSVILLE
State
MS
ZIP
38833
Mailing
87 CR 210, BURNSVILLE, MS 38833

What kind of inspection was it?

Inspection type
Federal Agency (M)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B

When did the case open and close?

Opened
Closing conference
Case closed
Last modified
Data loaded

Establishment context

NAICS code
332999
Employees
18
Ownership type
A

Citations

5 citations on file for this inspection.

5(a)(1)

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $16550.00 · Current $16550.00

General-duty citation text

OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm in that employees were exposed to fire hazards:    (a) Mill - located at 87 CR 210, Burnsville, MS - On or about January 29, 2025 employees were exposed  to fire hazards while using non intrinsically safe hand tools  in an area where combustible dust was present.
Recent events (3)
  • — P (S) $16550
  • — I (S) $16550
  • — Z (S) $16550

1910.132 D01

Serious Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $16550.00 · Current $0.00 Reduced

General-duty citation text

29 CFR  1910.132(d)(1):The employer did not assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment:  (a) Mill - located at 87 CR 210, Burnsville, MS - On or about January 29, 2025, the employer failed to provide employees with personal protective equipment to protect them from potential hazards present during maintenance and servicing operations.
Recent events (3)
  • — P (S) $0
  • — I (S) $0
  • — Z (S) $16550

1910.147 C01

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $16550.00 · Current $16550.00

General-duty citation text

29 CFR  1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative:  (a) Mill - located at 87 CR 210, Burnsville, MS - On or about January 29, 2025 the employer had not developed and implemented a lock out tag out program for the control of hazardous energy that include, procedures, employee training and periodic inspections to protect employees from hazards associated with maintaining and servicing equipment with multiple sources of energy.
Recent events (3)
  • — P (S) $16550
  • — I (S) $16550
  • — Z (S) $16550

1910.178 L06

Deleted Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $9457.00 · Current $0.00 Reduced

General-duty citation text

29 CFR  1910.178(l)(6): The certification did not include the name of the operator, the date of the training, the date of the evaluation, and the identity of the person(s) performing the training or evaluation:   (a) Mill - located at 87 CR 210, Burnsville, MS - On or about January 29, 2025, a certification of forklift operator performance evaluation was not documented for refresher training conducted least once every three years.
Recent events (2)
  • — I (S) $0
  • — Z (S) $9457

1910.178 O02

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $16550.00 · Current $11585.00 Reduced

General-duty citation text

29 CFR  1910.178(o)(2):Load(s) were being handled with no means of determining whether the rated capacity of the industrial truck(s) were exceeded:  (a) Mill - located at 87 CR 210, Burnsville, MS - On or about January 29, 2025 forklifts were used to unload raw materials that exceeded the capacity of the forklift.
Recent events (3)
  • — P (S) $11585
  • — I (S) $11585
  • — Z (S) $16550

More inspections at TRAXYS PROCESSING INC

View TRAXYS PROCESSING INC's full OSHA safety record →

More inspections in this industry (NAICS 332999)

More inspections in MS

Source

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348043605.