Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

MIDDLEFIELD, CT —

OSHA Inspection: POWERHOLD INC.

Planned inspection · Safety discipline

At a glance

On , OSHA opened a planned safety inspection of POWERHOLD INC. in 63 OLD INDIAN TRAIL, MIDDLEFIELD, CT 06455 (NAICS 333515). OSHA activity number 348071127.

Watch Powerhold INC. — free Get an email when a new federal OSHA severe-injury report for Powerhold INC. is published. One employer, no account, unsubscribe in one click.

Where did this inspection happen?

Establishment
POWERHOLD INC.
Site address
63 OLD INDIAN TRAIL
City
MIDDLEFIELD
State
CT
ZIP
06455
Mailing
63 OLD INDIAN TRAIL, MIDDLEFIELD, CT 06455

What kind of inspection was it?

Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B

When did the case open and close?

Opened
Closing conference
Case closed
Last modified
Data loaded

Establishment context

NAICS code
333515
Employees
13
Ownership type
A

Citations

3 citations on file for this inspection.

1910.212 A01

Other-than-serious Gravity 5 2 instances 2 exposed
Issued
Abate by
Penalty
Initial $3215.00 · Current $2251.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  WORKSHOP: On/or about February 27, 2025, and prior to the employer did not guard the following rotating machinery exposing employees' to cuts, lacerations, abrasion, and broken bones.  1. The rotating blade/milling cutter on the Enshu mill was unguarded.  2.  Both end nuts on the Baldor buffer were unguarded.
Recent events (2)
  • — I (O) $2250.5
  • — Z (S) $3215

1910.219 C02 I

Other-than-serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $3215.00 · Current $2251.00 Reduced

General-duty citation text

29 CFR 1910.219(c)(2)(i): All exposed part(s) of horizontal shafting seven (7) feet or less from floor or working platform were not protected by stationary casing(s) enclosing shafting completely or by trough(s) enclosing sides and top or sides and bottom of shafting:  WORKSHOP:  On/or about February 27, 2025, and prior to the employer did not guard the horizontal shaft on the Enshu mill exposing the employees to cuts, abrasions, lacerations and broken bones.
Recent events (2)
  • — I (O) $2250.5
  • — Z (S) $3215

1910.219 C04 I

Other-than-serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.219(c)(4)(i): Unguarded projecting shaft end(s) did not present a smooth edge and end and projected more than one half the diameter of the shaft:  WORKSHOP:  On/or about February 27, 2025, and prior to the employer did not guard the projecting horizontal shaft end on the Enshu mill exposing the employees to cuts, abrasions, lacerations and broken bones.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

More inspections in this industry (NAICS 333515)

More inspections in CT

Source

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348071127.