Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: JUAN CARLOS VAZQUEZ MARTIN

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of JUAN CARLOS VAZQUEZ MARTIN in 16700 US HIGHWAY 411, ODENVILLE, AL 35120 (NAICS 238160). OSHA activity number 348166091.

Watch Juan Carlos Vazquez Martin — free Get an email when a new federal OSHA severe-injury report for Juan Carlos Vazquez Martin is published. One employer, no account, unsubscribe in one click.
Site address
16700 US HIGHWAY 411
City
ODENVILLE
State
AL
ZIP
35120
Mailing
84 WILSON CIR., THORSBY, AL 35171
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
238160
Employees
3
Ownership type
A

3 citations on file for this inspection.

1926.453 B02 V

Serious Gravity 10 1 instance 1 exposed
Issued
Penalty
Initial $4965.00 · Current $4965.00
29 CFR  1926.453(b)(2)(v): A body belt was not worn and/or a lanyard was not attached to the boom or basket when working from an aerial lift:   (a) On or about April 08, 2025, at the jobsite located at 16700 US Highway 411, Odenville, AL:  the employer exposed employees to fall hazards, in that fall protection was not utilized by an employee in an aerial lift  while installing panel to the side of a building.
Recent events (1)
  • — Z (S) $4965

1926.501 B11

Serious Gravity 10 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $4965.00 · Current $4965.00
29 CFR  1926.501(b)(11): Each employee on a steep roof with unprotected sides and edges 6 feet (1.8 m) or more above lower levels was not protected from falling by guardrail systems with toeboards, safety net systems, or personal fall arrest systems:   (a) On or about April 08, 2025, at the jobsite located at 16700 US Highway 411, Odenville, AL:  the employer exposed an employee to a fall hazard, in that fall protection was not utilized by the employee while performing roofing work.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
  • — Z (S) $4965

1926.503 A01

Serious Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:  (a) On or about April 08, 2025, at the jobsite located at 16700 US Highway 411, Odenville, AL: the employer exposed employees to fall hazards, in that fall protection training was not provided to employees while performing roofing work.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348166091.