OSHA Inspection: SPACEMANAGER CLOSETS INC.

Issued

2025-09-04 00:00:00

Abate by

2025-09-16 00:00:00

Penalty

Initial $7945.00 · Current $7945.00

General-duty citation text

29 CFR  1910.132(d)(1)(i): When the employer had assessed the workplace hazard(s) and determined that hazard(s) were present, the employer did not select and/or use the types of personal protective equipment that would protect the affected employee from the hazards identified in the hazard assessment:  On or about April 11, 2025, and at times prior there to; the employer did not ensure the use of previously identified personal protective equipment while employees operated and conducted unscheduled maintenance interventions on a Biesse Akron 1445 B, Single-sided Edgebander.

Issued

2025-09-04 00:00:00

Abate by

2025-09-16 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.132(d)(2): The employer did not verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated, the person certifying that the evaluation has been performed, the date(s) of the hazard assessment, and, which identifies the document as a certification of hazard assessment:  On or about April 11, 2025, and at times prior there to; the employer did not verify through a written certification that a hazards assessment to identify hazards in the workplace had been performed.

Issued

2025-09-04 00:00:00

Abate by

2025-09-16 00:00:00

Penalty

Initial $9268.00 · Current $9268.00

General-duty citation text

29 CFR  1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:   On or about April 11, 2025, and at times prior there to, in the warehouse production area; employee(s) operated, serviced, and provided maintenance for a Biesse Akron 1445 B, Single-sided Edgebander without being provided with clear and specific procedures for the control of hazardous energy.

Issued

2025-09-04 00:00:00

Abate by

2025-09-12 00:00:00

Penalty

Initial $9268.00 · Current $9268.00

General-duty citation text

29 CFR  1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  On or about April 11, 2025, and at times prior there to, in the warehouse production area; employee(s) utilized a Biesse Akron 1445 B single-sided edgebander without functioning door interlocks and all protection cabin doors open while performing edgebanding work.