Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,214Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: DINKY'S LOGGING LLC

Federal Agency inspection · Safety discipline

On , OSHA opened a federal Agency safety inspection of DINKY'S LOGGING LLC in WV-971, OCEANA, WV 24870 (NAICS 113310). OSHA activity number 348209867.

Watch Dinky'S Logging LLC — free Get an email when a new federal OSHA severe-injury report for Dinky'S Logging LLC is published. One employer, no account, unsubscribe in one click.
Establishment
DINKY'S LOGGING LLC
Site address
WV-971
City
OCEANA
State
WV
ZIP
24870
Mailing
PO BOX 39, JUSTICE, WV 24851
Inspection type
Federal Agency (M)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
113310
Employees
2
Ownership type
A

9 citations on file for this inspection.

1910.266 D01 IV

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $2270.00 · Current $1500.00 Reduced
29 CFR  1910.266(d)(1)(iv):The employer did not provide, at no cost to the employee, and/or assure that each employee who operated a chain saw wore ballistic nylon leg protection or other  leg protection which the employer had demonstrated provides equivalent protection:  (a) Cutting Area, Located Near WV-971, Oceana, WV: On April 28, 2025, the employer did not ensure the employee who used a chain saw to fell trees wore ballistic nylon leg protection or other equivalent leg protection to protect them from struck-by hazards.  Abatement certification required within 10 days after abatement date.  The certification shall include a statement that abatement is complete, date and method of abatement, and states that employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (S) $1500
  • — Z (S) $2270

1910.266 D01 VII B

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1910.266(d)(1)(vii)(B):The employer did not provide, at no cost to the employee, and ensure that each employee wear face protection meeting the requirements of subpart I of Part 1910 where there was potential for facial injury:  (a) Cutting Area, Located Near WV-971, Oceana, WV: On April 28, 2025, the employer did not ensure the employee who used a chain saw to fell trees wore face protection to protect them from struck-by hazards.  Abatement certification required within 10 days after abatement date.  The certification shall include a statement that abatement is complete, date and method of abatement, and states that employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.266 E01 II H

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $2270.00 · Current $1500.00 Reduced
29 CFR  1910.266(e)(1)(ii)(H):The employer did not inspect and assure that safety devices were in place and functioning properly:  (a) Cutting Area, Located Near WV-971, Oceana, WV: On April 28, 2025, the employer did not inspect and assure the chainsaw used by an employee was equipped with the chain catcher designed to prevent the user from being struck by the chain in the event of a breakage.  Abatement certification required within 10 days after abatement date.  The certification shall include a statement that abatement is complete, date and method of abatement, and states that employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (S) $1500
  • — Z (S) $2270

1910.266 H02 II

Serious Gravity 10 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $16550.00 · Current $15000.00 Reduced
29 CFR  1910.266(h)(2)(ii): Before each tree is felled, conditions such as, but not limited to, snow and ice accumulation, the wind, the lean of tree, dead limbs, and the location of other trees, was not evaluated by the feller and precautions taken so a hazard is not created for an employee.  (a) Cutting Area, Located Near WV-971, Oceana, WV: On April 28, 2025, an employee felled a walnut tree that measured approximately 28" in diameter and 30' in length without taking the necessary precautions to mitigate potential hazards resulting from the location of other trees, to include felling trees that contained potentially broken or entangled limbs of adjacent trees.  Abatement certification and documentation required within 10 days after abatement date. The certification shall include a statement that abatement is complete, the date and method of abatement, and state that employees and their representatives were informed of this abatement.  Abatement documentation shall include documents demonstrating that abatement is complete, such as evidence of the purchase or repair of equipment, photograph or video evidence of abatement or other written records.
Recent events (2)
  • — I (S) $15000
  • — Z (S) $16550

1910.266 H02 I

Serious Gravity 10 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1910.266(h)(2)(i): Once the backcut was made the feller did not immediately move a safe distance away from the tree on the retreat path.  (a) Cutting Area, Located Near WV-971, Oceana, WV: On April 28, 2025, an employee felled a walnut tree that measured approximately 28" in diameter and 30' in length without immediately moving a safe distance away from the tree on the retreat path.  Abatement certification and documentation required within 10 days after abatement date. The certification shall include a statement that abatement is complete, the date and method of abatement, and state that employees and their representatives were informed of this abatement.  Abatement documentation shall include documents demonstrating that abatement is complete, such as evidence of the purchase or repair of equipment, photograph or video evidence of abatement or other written records.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.266 D06 III

Other-than-serious 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1910.266(d)(6)(iii): Each employee performing a logging operation at a logging work site did not work in a position or location that was within visual or audible contact with another employee:  (a) Cutting Area, Located Near WV-971, Oceana, WV: On April 28, 2025, the employer did not ensure the cutter and dozer operator were within visual or reliable audible contact with each other.  Abatement certification required within 10 days after abatement date.  The certification shall include a statement that abatement is complete, date and method of abatement, and states that employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.266 F01 III

Other-than-serious 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1910.266(f)(1)(iii):The employer did not ensure that operating and maintenance instructions were available either on the machine or in the area where the machine was being operated:  (a) Cutting Area, Located Near WV-971, Oceana, WV: On April 28, 2025 and times prior, an employee operated the John Deere 650K Dozer without having the operating and maintenance instructions available either on the equipment or in the area where the machine was in operation.   Abatement certification required within 10 days after abatement date.  The certification shall include a statement that abatement is complete, date and method of abatement, and states that employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.266 I05 IV

Other-than-serious 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1910.266(i)(5)(iv):The employer did not ensure that each current and new employee could properly and safely perform the work tasks and operate the tools, equipment, machines, and vehicles used in their job.  (a) Cutting Area, Located Near WV-971, Oceana, WV: On April 28, 2025, an employee performed felling operations on their first day of the job without the employer first ensuring the employee could properly and safely perform the task.  Abatement certification required within 10 days after abatement date.  The certification shall include a statement that abatement is complete, date and method of abatement, and states that employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.266 I07 I

Other-than-serious 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1910.266(i)(7)(i):The employer did not assure that each employee, including supervisors, had received first-aid and CPR training meeting at least the requirements specified in Appendix B:  (a) Cutting Area, Located Near WV-971, Oceana, WV: On April 28, 2025 and times prior, employees performed logging operations were exposed to associated hazards without the employer ensuring that each employee had received first-aid training and CPR training.  Abatement certification required within 10 days after abatement date.  The certification shall include a statement that abatement is complete, date and method of abatement, and states that employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

UNKNOWN

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348209867.