JOURDANTON, TX —
OSHA Inspection: ALPHA MACHINE & REPAIR LP
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of ALPHA MACHINE & REPAIR LP in 3255 N TEXAS 16, JOURDANTON, TX 78026 (NAICS 332999). OSHA activity number 348214305.
Where did this inspection happen?
- Establishment
- ALPHA MACHINE & REPAIR LP
- Site address
- 3255 N TEXAS 16
- City
- JOURDANTON
- State
- TX
- ZIP
- 78026
- Mailing
- 3255 N TEXAS 16, JOURDANTON, TX 78026
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 60
- Ownership type
- A
Citations
10 citations on file for this inspection.
1910.106 E06 II
- Issued
- Abate by
- Penalty
- Initial $8276.00 · Current $6000.00 Reduced
2037
General-duty citation text
29 CFR 1910.106(e)(6)(ii):Category 1 or 2 flammable liquids, or Category 3 flammable liquids with a flashpoint below 100 °F (37.8 °C), were dispensed into containers without the nozzle and container being electrically interconnected: On or about April 29, 2025, in the machine repair shop area, employees used naphtha from non-grounded 55-gallon containers to clean pump jack parts.
Recent events (2)
- — I (S) $6000
- — Z (S) $8276
1910.178 L04 III
- Issued
- Abate by
- Penalty
- Initial $8276.00 · Current $5000.00 Reduced
General-duty citation text
29 CFR 1910.178(l)(4)(iii):An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: On or about April 29, 2025, in the machine repair shop area, employees used Hyundai forklifts to transport materials without receiving reevaluation training on safe operation of the forklift within three years.
Recent events (2)
- — I (S) $5000
- — Z (S) $8276
1910.178 P01
- Issued
- Penalty
- Initial $9931.00 · Current $7330.00 Reduced
General-duty citation text
29 CFR 1910.178(p)(1):Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been taken out of service until restored to safe operating conditions: On or about April 29, 2025, in the machine repair shop area, employees operated a Hyundai forklift with damaged rear tires to transport pump jack parts and other materials.
Recent events (2)
- — I (S) $7330
- — Z (S) $9931
1910.178 Q06
- Issued
- Penalty
- Initial $9931.00 · Current $7330.00 Reduced
General-duty citation text
29 CFR 1910.178(q)(6):29 CFR 1910.178(q)(6): Industrial trucks were altered by the elimination of parts provided by the manufacturer: A) On or about April 29, 2025, in the machine repair shop area, employees operated Hyundai forklift model 50DA-7E serial number HHKHFV10ED0000217, with a missing seat belt. B) On or about April 29, 2025, in the machine repair shop area, employees operated Hyundai forklift model 50DA-7E serial number HHKHFV18PE0000004, with a missing seat belt.
Recent events (2)
- — I (S) $7330
- — Z (S) $9931
1910.212 B
- Issued
- Penalty
- Initial $6620.00 · Current $5000.00 Reduced
General-duty citation text
29 CFR 1910.212(b):Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving: On or about April 29, 2025, in the machine repair shop area, employees used a DeWalt bench grinder that was attached to a makeshift stand that was not securely anchored to the floor.
Recent events (2)
- — I (S) $5000
- — Z (S) $6620
1910.303 B01 IV
- Issued
- Penalty
- Initial $8276.00 · Current $7000.00 Reduced
General-duty citation text
29 CFR 1910.303(b)(1)(iv):Electric equipment was not free from recognized hazards that were likely to cause serious physical harm to employees, such as damaged electrical insulation: A) On or about April 29, 2025, in the machine repair shop area, employees used overhead Hubbell cord reels with electrical cords that had damage to the outer insulative sheathing. B) On or about April 29, 2025, in the machine repair shop area, employees used a relocatable power tap that had strain separation to the outer insulative sheath.
Recent events (2)
- — I (S) $7000
- — Z (S) $8276
1910.303 B02
- Issued
- Abate by
- Penalty
- Initial $11585.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1910.303(b)(2):Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: On or about April 29, 2025, in the machine repair shop area, employees used relocatable power taps that were daisy chained together and plugged into an extension cord from a live outlet.
Recent events (2)
- — I (S) $0
- — Z (S) $11585
1910.303 B07 I
- Issued
- Abate by
- Penalty
- Initial $8276.00 · Current $5000.00 Reduced
General-duty citation text
29 CFR 1910.303(b)(7)(i):Unused openings in boxes, raceways, auxiliary gutters, cabinets, equipment cases, or housings were not effectively closed to afford protection substantially equivalent to the wall of the equipment: On or about April 29, 2025, in the machine shop area, employees used a relocatable power tap near an electrical box that was not effectively closed.
Recent events (2)
- — I (S) $5000
- — Z (S) $8276
1904.39 A02
- Issued
- Penalty
- Initial $8276.00 · Current $5000.00 Reduced
General-duty citation text
29 CFR 1904.39(a)(2):The employer did not report within 24-hours a work-related incident resulting in in-patient hospitalization, amputation or the loss of an eye. On or about March 5, 2025, the employer did not report a work-related hospitalization of an employee to OSHA within the required 24-hour time period.
Recent events (2)
- — I (O) $5000
- — Z (O) $8276
1904.41 A01 I
- Issued
- Penalty
- Initial $1655.00 · Current $1000.00 Reduced
General-duty citation text
29 CFR 1904.41(a)(1)(i): The establishment had 20 or more employees but fewer than 250 employees at some time during the previous calendar year, and the establishment was classified in an industry listed in appendix A to subpart E of this part, and the employer did not electronically submit information from OSHA Form 300A Summary of Work-Related Injuries and Illnesses to OSHA or OSHA's designee by the specified date: The employer did not electronically submit information from OSHA form 300A to OSHA or to an OSHA designee within the required timeframe for the year 2024.
Recent events (2)
- — I (O) $1000
- — Z (O) $1655
More inspections in this industry (NAICS 332999)
SPRING, TX—2026-07-10
DORSTENER WIRE TECH INC.
SAN ANTONIO, TX—2026-07-10
ED LONG'S METAL WORKS
HUNTINGDON VALLEY, PA—2026-07-09
METAL ALLIANCE, INC.
AITKIN, MN—2026-07-01
111512 - TEEMARK MANUFACTURING INC
SOUTH EL MONTE, CA—2026-06-29
VAGA INDUSTRIES
More inspections in TX
SPRING, TX—2026-07-10
DORSTENER WIRE TECH INC.
FORT WORTH, TX—2026-07-10
RC PROFESSIONAL ROOFING OF TEXAS LLC
CYPRESS, TX—2026-07-10
FEDERICO CARVAJAL GARCIA
SAN ANTONIO, TX—2026-07-10
ED LONG'S METAL WORKS
SAN ANTONIO, TX—2026-07-09
WAREHOUSE RACK COMPANY, LP
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348214305.