OSHA Inspection: DHL MACHINE INTERNATIONAL

Issued

2025-08-14 00:00:00

Penalty

Initial $5296.00 · Current $2648.00 Reduced

General-duty citation text

29 CFR  1910.212(a)(3)(ii):Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s).  a.) 2450 Milford Square Pike, Quakertown, PA:  on or about May 8, 2025  - employees used Lagun milling machine where the chuck  was unguarded at the point of operation, exposing the operator/employee to an entanglement hazard.  b.) 2450 Milford Square Pike, Quakertown, PA:  on or about May 8, 2025  - employees used Dayton drill press where the chuck  was unguarded at the point of operation, exposing the operator/employee to an entanglement hazard.  c.) 2450 Milford Square Pike, Quakertown, PA:  on or about May 8, 2025  - employees used Chin Hung Lathe where the chuck  was unguarded at the point of operation, exposing the operator/employee to an entanglement hazard.

Issued

2025-08-14 00:00:00

Penalty

Initial $5296.00 · Current $2648.00 Reduced

General-duty citation text

29 CFR  1910.215(a)(4):Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch:  a.) 2450 Milford Square Pike, Quakertown, PA:  on or about May 8, 2025  - employees used a Baldor grinder where the work rest was not adjusted closely to the wheel at the point of operation, exposing the operator/employee to injury.  a.) 2450 Milford Square Pike, Quakertown, PA:  on or about May 8, 2025  - employees used a Oliver grinder where the work rest was not adjusted closely to the wheel at the point of operation, exposing the operator/employee to injury.

Issued

2025-08-14 00:00:00

Penalty

Initial $5296.00 · Current $2648.00 Reduced

General-duty citation text

29 CFR  1910.243(a)(3):Portable belt sanding machine(s) were not guarded at each nip point where the sanding belt runs onto the pulley(s):  a.) 2450 Milford Square Pike, Quakertown, PA:  on or about May 8, 2025  - employees used a Baldor belt sander without a guard at the point of operation, exposing the operator/employee to hand injury.

Issued

2025-08-14 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.303(g)(1):Sufficient access and working space was not provided and maintained about all electric equipment (operating at 600 volts, nominal, or less to ground) to permit ready and safe operation and maintenance of such equipment:  a.)  2450 Milford Square Pike, Quakertown, PA:  on or about May 8, 2025  - sufficient access to the electrical panels was not readily available to permit safe operation and maintenance of the equipment.