Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: DWS FRAMING PRO CONSTRUCTION LLC

Federal Agency inspection · Safety discipline

On , OSHA opened a federal Agency safety inspection of DWS FRAMING PRO CONSTRUCTION LLC in 12021 ROSEDALE DRIVE, ELLENDALE, DE 19941 (NAICS 238130). OSHA activity number 348271768.

Watch DWS Framing PRO Construction LLC — free Get an email when a new federal OSHA severe-injury report for DWS Framing PRO Construction LLC is published. One employer, no account, unsubscribe in one click.
Site address
12021 ROSEDALE DRIVE
City
ELLENDALE
State
DE
ZIP
19941
Mailing
36 EMERY CIRCLE, DELMAR, DE 19940
Inspection type
Federal Agency (M)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
238130
Employees
4
Ownership type
A

5 citations on file for this inspection.

1926.451 A06

Serious Gravity 10 1 instance 1 exposed
Issued
Penalty
Initial $16550.00 · Current $16550.00
29 CFR  1926.451(a)(6): Scaffolds were not designed by a qualified person.  a) 12021 Rosedale Drive, Ellendale, DE 19941: On or about May 27,2025, an employee was working inside a wooden box that was elevated on the forks of a JCB rough terrain forklift. The wooden box, used as a scaffold, was not designed by a qualified person, exposing the employee to fall hazards.
Recent events (1)
  • — Z (S) $16550

1926.451 C02 IV

Serious Gravity 10 1 instance 1 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR  1926.451(c)(2)(iv): Front-end loaders and similar pieces of equipment shall not be used to support scaffold platforms unless they have been specifically designed by the manufacturer for such use.  a) 12021 Rosedale Drive, Ellendale, DE 19941: On or about May 27, 2025, a JCB, model 509.42F, rough terrain forklift, was being used to support a wood box that was in use as a scaffold. The JCB was not designed for scaffold support by the manufacturer, exposing employees to fall, crush, and struck-by hazards.
Recent events (1)
  • — Z (S) $0

1926.451 G01

Serious Gravity 10 1 instance 1 exposed
Issued
Penalty
Initial $3972.00 · Current $3972.00
29 CFR  1926.451(g)(1): Each employee on a scaffold more than 10 feet above a lower level was not protected from falling to that lower level.  a) 12021 Rosedale Drive, Ellendale, DE 19941: On or about May 27, 2025, an employee working from a scaffold approximately twelve feet from ground was not provided with fall protection.
Recent events (1)
  • — Z (S) $3972

1926.602 C01 VIII A

Serious Gravity 10 1 instance 1 exposed
Issued
Penalty
Initial $16550.00 · Current $16550.00
29 CFR  1926.602(c)(1)(viii)(A): The industrial truck was not equipped with a safety platform/cage firmly secured to the lifting carriage and/or forks when used for lifting personnel:   a) 12021 Rosedale Drive, Ellendale, DE 19941: On or about May 27, 2025, an employee was working in a wooden box located on the forks of a JCB Loadall, model 509.42 F. The wooden box was not secured to the lifting cage and forks exposing the employee to fall hazards.
Recent events (1)
  • — Z (S) $16550

1926.602 D

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.602(d): The employer did not ensure that each employee operating a powered industrial vehicle had been trained and evaluated as required by paragraph 29 CFR 1910.178(l).   a) 12021 Rosedale Drive, Ellendale, DE 19941: On or about May 27, 2025, an employer was operating JCB Loadall, rough terrain forklift, model 509.42 F, without having received a combination of formal instruction, practical training, and evaluation of the operator's performance in accordance with the requirements set forth in 1910.178(l)(2)(ii).
Recent events (1)
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348271768.