Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

HARTLAND, WI —

OSHA Inspection: T-LON PRODUCTS, INC.

Planned inspection · Safety discipline

At a glance

On , OSHA opened a planned safety inspection of T-LON PRODUCTS, INC. in 1110 RICHARDS ROAD, HARTLAND, WI 53029 (NAICS 325211). OSHA activity number 348329723.

Watch T-Lon Products, INC. — free Get an email when a new federal OSHA severe-injury report for T-Lon Products, INC. is published. One employer, no account, unsubscribe in one click.

Where did this inspection happen?

Establishment
T-LON PRODUCTS, INC.
Site address
1110 RICHARDS ROAD
City
HARTLAND
State
WI
ZIP
53029
Mailing
1110 RICHARDS ROAD, HARTLAND, WI 53029

What kind of inspection was it?

Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B

When did the case open and close?

Opened
Closing conference
Case closed
Last modified
Data loaded

Establishment context

NAICS code
325211
Employees
79
Ownership type
A

Citations

4 citations on file for this inspection.

1910.212 A01

Serious Gravity 5 4 instances 11 exposed
Issued
Abate by
Penalty
Initial $7035.00 · Current $7035.00

General-duty citation text

29 CFR  1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  (a)  On or about June 24, 2025, employees working on and around the Aeonic Press (Model No. HD-30s & Press No. 7) were exposed to pinch points and caught-in hazards, in-that the employer did not ensure the shuttle box/top plate was properly guarded.    (b)  On or about June 24, 2025, employees working on and around the Hydraulic Press (Press No. 6) were exposed to pinch points and caught-in hazards, in-that the employer did not ensure the shuttle box/top plate was properly guarded.    (c)  On or about June 24, 2025, employees working on and around the Hydraulic Press (Press No. 50) were exposed to pinch points and caught-in hazards, in-that the employer did not ensure the shuttle box/top plate was properly guarded.    (d)  On or about June 24, 2025, employees working on and around the Hydraulic Press (Press No. 12B) were exposed to pinch points and caught-in hazards, in-that the employer did not ensure the shuttle box/top plate was properly guarded.
Recent events (2)
  • — I (S) $7035
  • — Z (S) $7035

1910.219 C03

Serious Gravity 5 4 instances 11 exposed
Issued
Abate by
Penalty
Initial $7035.00 · Current $0.00 Reduced

General-duty citation text

29 CFR  1910.219(c)(3): Vertical or inclined shafting seven -7 feet or less from floor or working platform was not enclosed with stationary casing(s).  (a)  On or about June 24, 2025, employees working on and around the Aeonic Press (Model No. HD-30s & Press No. 7) were exposed to a snagging/caught on hazard from an unguarded rotating vertical shaft from the shaker motor, on the back side of the press. The employer did not ensure ensure the rotating vertical shaft was properly guarded.    (b)  On or about June 24, 2025, employees working on and around the Hydraulic Press (Press No. 6) were exposed to a snagging/caught on hazard from an unguarded  rotating vertical shaft from the shaker motor, on the back side of the press.  The employer did not ensure ensure the rotating vertical shaft was properly guarded.    (c)  On or about June 24, 2025, employees working on and around the Hydraulic Press (Press No. 50) were exposed to a snagging/caught on hazard from an unguarded rotating vertical shaft from the shaker motor, on the back side of the press.  The employer did not ensure ensure the rotating vertical shaft was properly guarded.    (d)  On or about June 24, 2025, employees working on and around the Hydraulic Press (Press No. 12B) were exposed to a snagging/caught on hazard from an unguarded rotating vertical shaft from the shaker motor, on the back side of the press.  The employer did not ensure ensure the rotating vertical shaft was properly guarded.
Recent events (2)
  • — I (S) $0
  • — Z (S) $7035

1910.147 C04 I

Other-than-serious 5 instances 30 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:  (a) On or about June 24, 2025, the employer did not ensure that procedures were developed for the control of potentially hazardous energy while performing service and maintenance on equipment  (CNC machines, hydraulic press, etc.), exposing employees to caught-in and crushing hazards.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.147 C07 I B

Other-than-serious 1 instance 30 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.147(c)(7)(i)(B): Affected employee(s) was not instructed in the purpose and use of the energy control procedure.  (a) On or about June 24, 2025, the employer did not ensure that affected employees were trained in the purpose and use of the energy control (lockout/tagout) procedures, exposing employees to caught-in and crushing hazards.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

More inspections in this industry (NAICS 325211)

More inspections in WI

Source

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348329723.