Safety Incidents OSHA Severe Injury Reports · 2015–2025
3,783,325Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: HZ FRAMING LLC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of HZ FRAMING LLC. in 7575 MCEWEN RD, WASHINGTON TOWNSHIP, OH 45459 (NAICS 238130). OSHA activity number 348348699.

Watch HZ Framing LLC. — free Get an email when a new federal OSHA severe-injury report for HZ Framing LLC. is published. One employer, no account, unsubscribe in one click.
Establishment
HZ FRAMING LLC.
Site address
7575 MCEWEN RD
City
WASHINGTON TOWNSHIP
State
OH
ZIP
45459
Mailing
2422 LEBANON RD., LEBANON, OH 45036
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
238130
Employees
5
Ownership type
A

3 citations on file for this inspection.

1910.178 L01 II

Serious Gravity 10 1 instance 8 exposed
Issued
Abate by
Penalty
Initial $4965.00 · Current $4965.00
29 CFR 1926.602(d), by reference to 29 CFR  1910.178(l)(1)(ii): Prior to permitting an employee to operate a powered industrial truck (except for training purposes), the employer shall ensure that each operator has successfully completed the training required by this paragraph (l), except as permitted by paragraph (l)(5).    a.) On or about May 10, 2025, at 7575 McEwen Rd., Washington Township, Ohio 45459, the employer failed to ensure that an employee assigned to operate an all-terrain forklift had successfully completed the required powered industrial truck training and evaluation prior to being permitted to operate the truck. As a result, employees operating and working around the powered industrial truck were exposed to struck-by and caught-between hazards.
Recent events (1)
  • — Z (S) $4965

1926.501 B01

Serious Gravity 10 1 instance 8 exposed
Issued
Abate by
Penalty
Initial $4965.00 · Current $4965.00
29 CFR  1926.501(b)(1):"Unprotected sides and edges." Each employee on a walking/working surface (horizontal and vertical surface) with an unprotected side or edge which is 6 feet (1.8 m) or more above a lower level shall be protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems.  a.) On or about May 10, 2024, at a multi-family residential construction site, the employer failed to ensure that floor openings on the second and third levels were protected by a guardrail system. As a result, employees installing framing materials were exposed to fall hazards of 6 feet or more to the level below.
Recent events (1)
  • — Z (S) $4965

1926.501 B14

Serious Gravity 10 1 instance 8 exposed
Issued
Abate by
Penalty
Initial $4965.00 · Current $4965.00
29 CFR  1926.501(b)(14): "Wall openings." Each employee working on, at, above, or near wall openings (including those with chutes attached) where the outside bottom edge of the wall opening is 6 feet (1.8 m) or more above lower levels and the inside bottom edge of the wall opening is less than 39 inches (1.0 m) above the walking/working surface, shall be protected from falling by the use of a guardrail system, a safety net system, or a personal fall arrest system.   a.) On or about May 10, 2024, at a newly constructed multi-family residential complex, the employer failed to ensure that wall openings on the second and third levels, where the inside bottom edge was less than 39 inches above the walking/working surface, were protected by a guardrail system. As a result, employees installing framing materials were exposed to fall hazards of approximately 23 feet 3 inches to the level below.
Recent events (1)
  • — Z (S) $4965

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348348699.