Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: JAGUAR 2024 INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of JAGUAR 2024 INC. in 3031 FINLEY RD., DOWNERS GROVE, IL 60515 (NAICS 238120). OSHA activity number 348379371.

Watch Jaguar 2024 INC. — free Get an email when a new federal OSHA severe-injury report for Jaguar 2024 INC. is published. One employer, no account, unsubscribe in one click.
Establishment
JAGUAR 2024 INC.
Site address
3031 FINLEY RD.
City
DOWNERS GROVE
State
IL
ZIP
60515
Mailing
2314 ROUTE 59 APT 210, PLAINFIELD, IL 60586
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
238120
Employees
4
Ownership type
A

6 citations on file for this inspection.

1926.100 A

Serious Gravity 5 1 instance 3 exposed
Issued
Penalty
Initial $1929.00 · Current $1100.00 Reduced
29 CFR  1926.100(a):Employees working in areas where there is a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns, was not protected by protective helmets.  On or about July  16, 2025, employees were not wearing protective helmets where there was a possible danger of head injury from falling objects.  This item was corrected during the inspection.
Recent events (2)
  • — I (S) $1100
  • — Z (S) $1929

1926.453 B02 V

Serious Gravity 5 1 instance 1 exposed
Issued
Penalty
Initial $2412.00 · Current $1375.00 Reduced
29 CFR 1926.453(b)(2)(v):  A body belt was not worn and/or a lanyard was not attached to the boom or the basket when working from an aerial lift:  Note: As of January 1, 1998, subpart M of this part (1926.502(d)) provides that body belts are not acceptable as part of a personal fall arrest system:  a)  On July 16, 2025, employees were exposed to the hazard of falling approximately 25 feet to the ground while working from the JLG 740 AJ aerial lift without wearing personal fall arrest equipment or a full body harness with a lanyard attached to the boom or basket.    No abatement certification or documentation is required for this item.
Recent events (2)
  • — I (S) $1375
  • — Z (S) $2412

1926.502 D06 I

Serious Gravity 5 2 instances 2 exposed
Issued
Abate by
Penalty
Initial $2838.00 · Current $1629.00 Reduced
29 CFR  1926.502(d)(6)(i):Snap hooks were connected  directly to webbing, rope or wire rope:  a) On or about July 16, 2025, employees performing commercial construction activities were not protected from a fall exposing employees to a fall of more than 25 feet.  Employees attached snap hooks directly to rope life lines, exposing employees to disengagement of snap hook, which could lead to a fall hazard of more than 25 feet.    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $1629
  • — Z (S) $2838

1926.502 D15 II

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.502(d)(15)(ii): Anchorages used for attachment of personal fall arrest systems were not designed, installed and used under the supervision of a qualified person:  a) On or about July 16, 2025, employees performing commercial construction activities were not protected from a fall exposing employees to a fall of more than 25 feet.  The employer did not ensure that the anchorage used for attachment of personal fall arrest equipment  was installed under the supervision of a qualified person.    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.760 A01

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1926.760(a)(1):29 CFR 1926.760(a)(1):  Except as provided by paragraph (a)(3) of this section, each employee engaged in a steel erection activity who was on a walking/working surface with an unprotected side or edge more than 15 feet* (4.6m) above a lower level was not protected from fall hazards by guardrail systems, safety net systems, personal fall arrest systems, positioning device systems or fall restraint systems:  On or about July 16, 2025, an employee engaged in a steel erection activity who was on a walking/working surface with an unprotected side or edge more than 15 feet* (4.6m) above a lower level was not protected from fall hazards by guardrail systems, safety net systems, personal fall arrest systems, positioning device systems or fall restraint systems.    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.503 B01

Other-than-serious 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1926.503(b)(1):The employer shall verify compliance with paragraph (a) of this section by preparing a written certification record. The written certification record shall contain the name or other identity of the employee trained, the date(s) of the training, and the signature of the person who conducted the training or the signature of the employer. If the employer relies on training conducted by another employer or completed prior to the effective date of this section, the certification record shall indicate the date the employer determined the prior training was adequate rather than the date of actual training.  On or about July 16, 2025, the employer failed to document fall protection training provided to employees.  The employer did not certify fall training for employees performing commercial construction activities at heights exceeding six feet.  Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348379371.