Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: JSA SIDING LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of JSA SIDING LLC in 16856 W. 92ND LOOP, ARVADA, CO 80403 (NAICS 238170). OSHA activity number 348382250.

Watch JSA Siding LLC — free Get an email when a new federal OSHA severe-injury report for JSA Siding LLC is published. One employer, no account, unsubscribe in one click.
Establishment
JSA SIDING LLC
Site address
16856 W. 92ND LOOP
City
ARVADA
State
CO
ZIP
80403
Mailing
12136 E ESPOSITION AVE, AURORA, CO 80012
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
238170
Employees
4
Ownership type
A

7 citations on file for this inspection.

1926.102 A02

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $4256.00 · Current $4256.00
29 CFR  1926.102(a)(2):The employer did not ensure that each affected employee used eye protection that provided side protection when there is a hazard from flying objects:  (A)  On or about July 1, 2025 and at times prior, the  employer did not ensure that each affected employee used eye protection as required. The employees were operating the pneumatic nail guns on the soffit without eye protection. This exposed employees to struck-by hazards.
Recent events (1)
  • — Z (S) $4256

1926.302 B03

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $4256.00 · Current $4256.00
29 CFR  1926.302(b)(3): All pneumatically driven nailers, staplers, and other similar equipment provided with automatic fastener feed, which operate at more than 100 p.s.i. pressure at the tool did not have a safety device on the muzzle to prevent the tool from ejecting fasteners, unless the muzzle is in contact with the work surface:  a) On or before July 01, 2025, and at times prior, the employer did not ensure employees were provided with pneumatically driven nail guns with operational safety devices, muzzle, to prevent the tool from accidentally ejecting a fastener toward the operator. The pneumatic nail guns were used to drive 2" or longer framing nails. Compressor to drive the nail guns was a 150 p.s.i pancake unit. This condition exposed employees to struck-by hazards.
Recent events (1)
  • — Z (S) $4256

1926.302 B06

Serious Gravity 5 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1926.302(b)(6): The use of hoses for hoisting or lowering tools shall not be permitted:  (a)  On or before July 01, 2025, and at times prior,  the employer did not ensure employees were not using the hoses of the pneumatic nail guns to rise and lower the tools to employees working at heights above 20 feet. The condition exposed employees to stuck-by hazards.
Recent events (1)
  • — Z (S) $0

1926.416 E01

Serious Gravity 5 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $2837.00 · Current $2837.00
29 CFR  1926.416(e)(1):  Worn or frayed electric cords or cables were used:  (a) On or before July 01, 2025, and at times prior, the employer did not ensure employees were provided with temporary extension cords without worn or frayed insulation. This exposed the employees to electrical shock or electrocution hazards.
Recent events (1)
  • — Z (S) $2837

1926.451 C03

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $4965.00 · Current $4965.00
29 CFR  1926.451(c)(3): Supported scaffold poles, legs, post, frames, and/or uprights were not plumb and braced to prevent swaying and displacement:  a) On and before July 01,  2025, and at times prior, the employer did not ensure the pump jack scaffold was plumb and level. This condition exposed the employees to a falls greater than 15 feet.
Recent events (1)
  • — Z (S) $4965

1926.451 G04 I

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1926.451(g)(4)(i): Guardrail systems were not installed along all open sides and ends of platforms:    a) On and before July 01, 2025, and at times prior, the employer did not ensure employees working on a pump jack scaffold were protected from falls by the use of guardrails along all open sides and ends of the scaffold.  This condition exposed employees to fall hazards greater than 15 feet.
Recent events (1)
  • — Z (S) $0

1926.451 H02 I

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1926.451(h)(2)(i): The area below the scaffold was not barricaded, and employees were not prohibited from entering the hazard area:  a) On and before July 01, 2025, and at times prior, the employer did not ensure employees were protected from falling objects in that employees were performing various carpentry duties below the elevated pump jack platform that was constructed without toe boards, screens, or barricades. This condition exposed employees to stuck-by hazards.
Recent events (1)
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348382250.