Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

DRUMS, PA —

OSHA Inspection: DW MACHINERY & FABRICATING CO.

Complaint inspection · Safety discipline

At a glance

On , OSHA opened a complaint safety inspection of DW MACHINERY & FABRICATING CO. in 77 OAK STREET, DRUMS, PA 18222 (NAICS 332710). OSHA activity number 348397142.

Watch DW Machinery & Fabricating CO. — free Get an email when a new federal OSHA severe-injury report for DW Machinery & Fabricating CO. is published. One employer, no account, unsubscribe in one click.

Where did this inspection happen?

Establishment
DW MACHINERY & FABRICATING CO.
Site address
77 OAK STREET
City
DRUMS
State
PA
ZIP
18222
Mailing
77 OAK STREET, DRUMS, PA 18222

What kind of inspection was it?

Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B

When did the case open and close?

Opened
Closing conference
Case closed
Last modified
Data loaded

Establishment context

NAICS code
332710
Employees
32
Ownership type
A

Citations

3 citations on file for this inspection.

1910.179 J03

Serious Gravity 5 7 instances 34 exposed
Issued
Penalty
Initial $6621.00 · Current $6250.00 Reduced

General-duty citation text

29 CFR  1910.179(j)(3): A complete periodic inspection of crane(s) had not been conducted in the past 12 months:  a) 77 Oak Street, Drums, Pennsylvania 18222: On or about July 25, 2025, employees operated a Kone M6, Crane Serial Number US61078821, without a periodic inspection having been completed, exposing employees to struck-by hazards from loads, including, but not limited to, steel.   b) 77 Oak Street, Drums, Pennsylvania 18222: On or about July 25, 2025, employees operated a Kone 3M, Crane Serial Number 10841710, without a periodic inspection having been completed, exposing employees to struck-by hazards from loads, including, but not limited to, steel.   c) 77 Oak Street, Drums, Pennsylvania 18222: On or about July 25, 2025, employees operated a Kone Unknown Model, Crane Serial Number 10843531, without a periodic inspection having been completed, exposing employees to struck-by hazards from loads, including, but not limited to, steel.   d) 77 Oak Street, Drums, Pennsylvania 18222: On or about July 25, 2025, employees operated a Kone M6, Hoist Serial Number 10000399171, without a periodic inspection having been completed, exposing employees to struck-by hazards from loads, including, but not limited to, steel.   e) 77 Oak Street, Drums, Pennsylvania 18222: On or about July 25, 2025, employees operated a Kone M6, Crane Serial Number US61078621, without a periodic inspection having been completed, exposing employees to struck-by hazards from loads, including, but not limited to, steel.   f) 77 Oak Street, Drums, Pennsylvania 18222: On or about July 25, 2025, employees operated a Kone 3M, Crane Serial Number 10841707, without a periodic inspection having been completed, exposing employees to struck-by hazards from loads, including, but not limited to, steel.   g) 77 Oak Street, Drums, Pennsylvania 18222: On or about July 25, 2025, employees operated a Kone M5, Hoist Serial Number 10000339461, without a periodic inspection having been completed, exposing employees to struck-by hazards from loads, including, but not limited to, steel.   CORRECTED DURING INSPECTION
Recent events (2)
  • — I (S) $6250
  • — Z (S) $6621

1910.147 C04 I

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $6621.00 · Current $6250.00 Reduced

General-duty citation text

29 CFR  1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:   a) 77 Oak Street, Drums, Pennsylvania 18222: On or about July 25, 2025 lockout/tagout procedures were not developed for employees conducting maintenance activities, exposing employees to amputation hazards.  ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
  • — I (S) $6250
  • — Z (S) $6621

1904.41 A01 I

Other-than-serious 1 instance 34 exposed
Issued
Abate by
Penalty
Initial $1324.00 · Current $500.00 Reduced

General-duty citation text

29 CFR  1904.41(a)(1)(i): An establishment had 20-249 employees at any time during the previous calendar year, and is classified in an industry listed in appendix A to subpart E of this part, did not electronically submit information from OSHA Form 300A Summary of Work Related Injuries and Illnesses to OSHA or OSHA's designee by March 2, 2025:  a) DW Machinery & Fabricating Co: The employer failed to submit data from their 2024 OSHA 300A to the OSHA Injury Tracking Application by March 2, 2025.  ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
  • — I (O) $500
  • — Z (O) $1324

More inspections in this industry (NAICS 332710)

More inspections in PA

Source

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348397142.