OSHA Inspection: DIVINE ENERGY SOLUTIONS, INC.

Issued

2026-01-13 00:00:00

Abate by

2026-03-03 00:00:00

Penalty

Initial $2837.00 · Current $0.00 Reduced

General-duty citation text

29 CFR  1910.134(e)(1):The employer did not provide a medical evaluation to determine the employee's ability to use a respirator before the employee was fit tested or required to use the respirator in the workplace:   a) 493 West lookout Ave: Employees were required to use an N95 respirator without being medical evaluated, on or about 9/16/25.

Issued

2026-01-13 00:00:00

Abate by

2026-03-03 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.134(f)(1):The employer did not ensure that employee(s) required to use a tight-fitting facepiece respirator passed the appropriate qualitative fit test (QLFT) or quantitative fit test (QNFT):  a) 493 West Lookout Ave, Hackensack NJ: The  Employer did not ensure that employees using respirators were fit tested, on or about 9/16/25

Issued

2026-01-13 00:00:00

Penalty

Initial $2837.00 · Current $2000.00 Reduced

General-duty citation text

29 CFR  1926.102(a)(1):The employer did not ensure employees used eye and face protection equipment when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents:   a) Right side of the residential home: Employees were exposed to eye injuries while spraying insolation without the use of eye and face protection, on or about 9/16/25.

Issued

2026-01-13 00:00:00

Penalty

Initial $2837.00 · Current $2000.00 Reduced

General-duty citation text

29 CFR  1926.152(a)(1):Containers other than approved metal safety cans were used for the handling and use of flammable liquids in quantities greater than one gallon:  a) Inside a working box truck: Employees were utilizing an unapproved 5 gallon container with flammable liquids, on or about 9/16/25

Issued

2026-01-13 00:00:00

Penalty

Initial $3618.00 · Current $2000.00 Reduced

General-duty citation text

29 CFR  1926.300(b)(2):Belts, gears, shafts, pulleys, sprockets, spindles, drums, fly wheels, chains, or other reciprocating, rotating, or moving parts of equipment exposed to contact by the employees or which otherwise created a hazard, were not guarded:  a) Box work truck: Employees were exposed to amputations hazards, while working approximately 2 inches from unguarded gears, on or about 9/16/25.

Issued

2026-01-13 00:00:00

Penalty

Initial $3618.00 · Current $2000.00 Reduced

General-duty citation text

29 CFR  1926.1053(b)(7): Ladders shall not be used on slippery surfaces unless secured or provided with slip-resistant feet to prevent accidental displacement. Slip-resistant feet shall not be used as a substitute for care in placing, lashing, or holding a ladder that is used upon slippery surfaces including, but not limited to, flat metal or concrete surfaces that are constructed so they cannot be prevented from becoming slippery.  a) Right side of the residential home: Ladders were not secured or provided with good condition slip-resistant feet to prevent accidental displacement on slippery surfaces as required, on or about 9/16/25

Issued

2026-01-13 00:00:00

Penalty

Initial $3618.00 · Current $2000.00 Reduced

General-duty citation text

29 CFR  1926.1053(b)(15): Ladders shall be inspected by a competent person for visible defects on a periodic basis and after any occurrence that could affect their safe use.  a) Front and right side of the residential home: Ladders were not inspected as required for visible defects, on or about 9/16/25 -