OSHA Inspection: CCMI INC

Issued

2026-04-10 00:00:00

Abate by

2026-05-28 00:00:00

Penalty

Initial $2270.00 · Current $1135.00 Reduced

General-duty citation text

29 CFR 1910.28(b)(1)(i):Except as provided elsewhere in this section 29 CFR 1910.28, the employer did not ensure that each employee on a walking-working surface with an unprotected side or edge that is 4 feet (1.2 m) or more above a lower level is protected from falling by one or more of the systems described in 29 CFR 1910.28(b)(1)(i):  a) On or about 11/20/2025 on the site located at 2939 New York 14, Geneva, NY, 14456: An employee was exposed to fall of greater than 4 feet when working on the M4 "Big Maac" deck. Fall distance was 57 inches.

Issued

2026-04-10 00:00:00

Abate by

2026-06-30 00:00:00

Penalty

Initial $2838.00 · Current $1419.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:   a) On or about 12/4/2025 on the site located at 2939 New York 14, Geneva, NY, 14456: The employer did not develop, document and utilize procedures for the control of hazardous energy.

Issued

2026-04-10 00:00:00

Abate by

2026-06-30 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.147(c)(6)(i):The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed:  a) On or about 12/4/2025 on the site located at 2939 New York 14, Geneva, NY, 14456: The employer did not conduct periodic inspections of the energy control procedures annually to ensure the documented procedures and standard were being followed exposing employees to caught in hazards.

Issued

2026-04-10 00:00:00

Abate by

2026-06-30 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.147(c)(7)(i):The employer did not provide adequate training to ensure that employees acquired the knowledge and skills required for the safe application, usage and removal of energy control devices:  a) On or about 12/4/2025 on the site located at 2939 New York 14, Geneva, NY, 14456: The employer did not provide employees with lock out tag out training.

Issued

2026-04-10 00:00:00

Abate by

2026-09-30 00:00:00

Penalty

Initial $1702.00 · Current $851.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  a) On or about 12/4/2025 on the site located at 2939 New York 14, Geneva, NY, 14456: Employees were exposed to caught in hazards when using tools and air guns to remove debris from parts on the Thermwood 5-Axis Router model number C67S without machine guarding.   b) On or about 12/4/2025 on the site located at 2939 New York 14, Geneva, NY, 14456: Employees were exposed to caught in hazards when using tools and air guns to remove debris from parts on the Diversified Machine Systems 5-Axis Router model number 5T5-6-6-36SCOxRx without machine guarding.

Issued

2026-04-10 00:00:00

Penalty

Initial $2270.00 · Current $1135.00 Reduced

General-duty citation text

29 CFR 1910.1200(e)(1):The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:   a) On or about 12/4/2025 on the site located at 2939 New York 14, Geneva, NY, 14456: The employer did not develop or implement a written hazard communication program in accordance with 29 CFR 1910.1200(e)(1) that would include at least the following:  1) Requirement for labeling and other forms of warning; 2) Safety data sheet availability; 3) Employee information and training; 4) A list of hazardous chemicals known to be present in the workplace;  5) Methods to inform employees of the hazards on non-routine tasks; and  6) Methods to provide other employer(s) access to safety data sheet; information on any precautionary measures and the labeling system used in the workplace.  Employee(s) were working with hazardous chemicals including but not limited to: Denatured Alcohol 190 Stirling Lubricants, Per-Fix 8205 Chem-Pak, UL300 Chemical Concepts and MEK_Stirling Lubricants.

Issued

2026-04-10 00:00:00

Abate by

2026-05-06 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:   a) On or about 12/4/2025 on the site located at 2939 New York 14, Geneva, NY, 14456: The employer did not provide employees with information and training regarding chemical hazards, personal protective equipment,  in their work areas.  Employee(s) were working with hazardous chemicals including but not limited to: Denatured Alcohol 190 Stirling Lubricants, Per-Fix 8205 Chem-Pak, UL300 Chemical Concepts and MEK_Stirling Lubricants.

Issued

2026-04-10 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.178(a)(5):The powered industrial truck was equipped with front-end attachments other than factory installed attachments, however the employer did not request that the truck be marked to identify the attachments and show the approximate weight of the truck and attachment combination at maximum elevation with load laterally centered:  a) On or about 12/4/2025 on the site located at 2939 New York 14, Geneva, NY, 14456: The Toyota Electric Forklift Model # 9BRU23, Serial # 9BRU23-41444, was not marked with the identity of the extended fork attachment and the approximate weight of the combination of the truck and extended fork attachment with a laterally centered load at the maximum elevation.

Issued

2026-04-10 00:00:00

Abate by

2026-06-01 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.178(l)(6): The employer did not certify that each operator had been trained and evaluated through a certification that included the name of the operator, the date of the training, that date of evaluation, and the identity of the person(s) performing the training or evaluation:    a) On or about 12/4/2025 on the site located at 2939 New York 14, Geneva, NY, 14456: The employer did not maintain records for employees operating forklifts that contained the employees name, date of training, date of evaluation, and the person performing the training.