OSHA Inspection: K BERENYI LLC

Issued

2026-02-11 00:00:00

Abate by

2026-03-04 00:00:00

Penalty

Initial $4256.00 · Current $1000.00 Reduced

General-duty citation text

29 CFR  1910.141(c)(1)(i): Toilet facilities were not provided in accordance with TABLE J-1 of this Section:  Worksite - Employer did not ensure that toilet facilities were provided and accessible at all times when employees were present in accordance with Table J-1.

Issued

2026-02-11 00:00:00

Abate by

2026-03-10 00:00:00

Penalty

Initial $2837.00 · Current $200.00 Reduced

General-duty citation text

29 CFR  1910.303(f)(2): Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose:  Storefront - Employer did not ensure that breakers in the GE PowerMark Gold Load Center panel were legibly marked, in the following instances:      a.  20A Breaker #1    b.  20A Breaker #3    c.  20A Breaker #5    d.  20A Breaker #9    e.  20A Breaker #10    f.   20A Breaker #12    g.  20A Breaker #18

Issued

2026-02-11 00:00:00

Abate by

2026-03-10 00:00:00

Penalty

Initial $3547.00 · Current $500.00 Reduced

General-duty citation text

29 CFR  1910.303(b)(1)(i): Electrical equipment was not used or maintained in accordance with the listing and labeling:  Storefront - Electrical equipment was not used in accordance with the listing and labeling, in the following instances:     a.  GE PowerMark Gold Load Center panel did not have a latch or means to be secured the cabinet door.    b.  ADT Commercial security keypad device with a damaged plug prong.    c.  An outlet with a history of sparking and very tight terminal connections.

Issued

2026-02-11 00:00:00

Abate by

2026-03-10 00:00:00

Penalty

Initial $2837.00 · Current $500.00 Reduced

General-duty citation text

29 CFR  1910.305(b)(2)(i): Each outlet box in completed installations did not have a cover, faceplate, or fixture canopy:   Office  - The outlet under the desk did not have a cover or faceplate exposing employees to electrical hazards.

Issued

2026-02-11 00:00:00

Abate by

2026-02-24 00:00:00

Penalty

Initial $3547.00 · Current $300.00 Reduced

General-duty citation text

29 CFR  1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure:  Storefront - A flexible extension cord was used in lieu of  permanent wiring for the nighttime illumination system.

Issued

2026-02-11 00:00:00

Abate by

2026-02-23 00:00:00

Penalty

Initial $4965.00 · Current $300.00 Reduced

General-duty citation text

29 CFR  1910.305(g)(1)(iv)(B): Unless specifically permitted otherwise in paragraph (g)(1)(ii) of this section, flexible cords and cables were used where run through holes in walls, ceilings, or floors:    Storefront and Office Room - An electrical appliance cable was run through a wall from the office into the working area to power a security keypad device; exposing employees to electrical hazards such as electric shock and fire.

Issued

2026-02-11 00:00:00

Abate by

2026-02-24 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.305(g)(1)(iv)(C): Flexible cords and cables were used where run through doorways, windows, or similar openings.  Storefront - Employees were exposed to electrical hazards, in the following instances:      a.  A flexible extension cord was run thru a window for the nighttime illumination system.    b.  A flexible extension cord was run through a doorway connecting the office room to the storefront room.

Issued

2026-02-11 00:00:00

Abate by

2026-02-24 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.334(a)(2)(i):Portable cord and plug connected equipment and flexible cord sets (extension cords) were not visually inspected before use on any shift for external defects (such as loose parts, deformed and missing pins, or damage to outer jacket or insulation) and for evidence of possible internal damage (such as pinched or crushed outer jacket):  Storefront - Employer did not ensure that electrical extension cords were visually inspected before each shift for evidence of damage.