1,224,460Inspections Most recent open 2026-07-13 Last loaded 2026-07-16
Safety Incidents OSHA Severe Injury Reports · 2015–2025

OSHA Inspection: ZIM ACQUISITION CORP

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of ZIM ACQUISITION CORP in 33 BROAD COMMON ROAD UNIT 1, BRISTOL, RI 02809 (NAICS 336612). OSHA activity number 348674441.

Site address
33 BROAD COMMON ROAD UNIT 1
City
BRISTOL
State
RI
ZIP
02809
Mailing
33 BROAD COMMON ROAD SUITE 1, BRISTOL, RI 02809
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
336612
Employees
32
Ownership type
A

8 citations on file for this inspection.

1910.178 L01 I

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $7035.00 · Current $4221.00 Reduced
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l).  a) Worksite: On or about January 8, 2026, employees operated Powered Industrial Trucks without adequate training in accordance with paragraph (l) to do so.
Recent events (2)
  • — I (S) $4221
  • — Z (S) $7035

1910.179 J03

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $5627.00 · Current $3376.00 Reduced
29 CFR 1910.179(j)(3): A complete periodic inspection of crane(s) had not been conducted in the past 12 months.    a) Worksite: On or about January 8, 2026, the employer did not ensure cranes in the establishment were inspected within a 12-month period.
Recent events (2)
  • — I (S) $3376.2
  • — Z (S) $5627

1910.305 B01 I

Other-than-serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $5627.00 · Current $2000.00 Reduced
29 CFR 1910.305(b)(1)(i): Conductors entering cutout boxes, cabinets, or fittings were not protected from abrasion, and openings through which conductors entered were not effectively closed.  a) Sail Feed Machine: On or about January 8, 2026, employees were exposed electrical shock and burn hazards while operating a Sail Feed Machine, Nichols Hand Miller, that had exposed conductors.
Recent events (2)
  • — I (O) $2000
  • — Z (S) $5627

1910.147 C06 I

Other-than-serious 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $790.00 · Current $474.00 Reduced
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed.  a) Worksite: On or about January 8, 2026, the employer did not ensure that Lockout/Tag-out procedures were inspected annually.
Recent events (2)
  • — I (O) $474
  • — Z (O) $790

1910.147 C07 I

Other-than-serious 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.147(c)(7)(i): The employer did not provide adequate training to ensure that the purpose and function of the energy control program was understood by employees.    a) Worksite: On or about January 8, 2026, the employer did not ensure that training was provided to both authorized and affected employees.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.178 L04 III

Other-than-serious 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $790.00 · Current $0.00 Reduced
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years.   a) Worksite: On or about January 8, 2026, the employer did not ensure that each Powered Industrial Truck operator was evaluated once every three years.
Recent events (2)
  • — I (O) $0
  • — Z (O) $790

1910.305 G01 IV A

Other-than-serious 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $790.00 · Current $474.00 Reduced
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure.   a) Line Cutting Workstation: On or about January 8, 2026, employees were exposed electrical hazards while using an orange extension cord without GFCI protection to provide power to the Line Cutting Station.  b) Boat Fitout Workstation: On or about January 8, 2026, employees were exposed electrical hazards while using an orange extension cord without GFCI protection to provide power to the Boat Fitout Work Station.  c) Metal Fabrication Workstation: On or about January 8, 2026, employees were exposed electrical hazards while using an orange extension cord without GFCI protection to provide power to the Metal Fabrication Work Station.
Recent events (2)
  • — I (O) $474
  • — Z (O) $790

1910.305 G02 III

Other-than-serious 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws.    a) Sail Feed Machine: On or about January 8, 2026, employees were exposed electrical hazards when a black SJ Cord powering the Sail Feed Machine did not have strain relief.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View ZIM ACQUISITION CORP's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348674441.