Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,214Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: WG, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of WG, INC. in 254 E. GENEVA, WHEATON, IL 60187 (NAICS 238130). OSHA activity number 348689829.

Watch WG, INC. — free Get an email when a new federal OSHA severe-injury report for WG, INC. is published. One employer, no account, unsubscribe in one click.
Establishment
WG, INC.
Site address
254 E. GENEVA
City
WHEATON
State
IL
ZIP
60187
Mailing
6211 W. GUNNISON ST., CHICAGO, IL 60630
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
238130
Employees
3
Ownership type
A

5 citations on file for this inspection.

1926.501 B01

Serious Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $4965.00 · Current $2490.00 Reduced
29 CFR  1926.501(b)(1):"Unprotected sides and edges." Each employee on a walking/working surface (horizontal and vertical surface) with an unprotected side or edge which is 6 feet (1.8 m) or more above a lower level shall be protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems.  On or about January 14, 2026, employees performing carpentry work were not protected from a fall, exposing employees to falls of 13-19 feet.  Abatement documentation is required of this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (2)
  • — I (S) $2490
  • — Z (S) $4965

1926.502 D06 I

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $4965.00 · Current $2485.00 Reduced
29 CFR  1926.502(d)(6)(i): Unless the snaphook is a locking type and designed for the following connections, snaphooks shall not be engaged directly to webbing, rope or wire rope.  On or about January 14, 2026, employees connected snaphooks directly to a wire rope (horizontal lifeline), exposing employees to hazards associated with gate failure, cross-loading and or catastrophic failure.   Abatement documentation is required of this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (2)
  • — I (S) $2485
  • — Z (S) $4965

1926.502 D08

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1926.502(d)(8): Horizontal lifelines shall be designed, installed, and used, under the supervision of a qualified person, as part of a complete personal fall arrest system, which maintains a safety factor of at least two.  On or about January 14, 2026, employees used a horizontal lifeline that was not inspected by a qualified person or under the supervision of a qualified person, exposing employees to the hazards associated with using a horizontal lifeline systems improperly.  Abatement documentation is required of this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.503 A02 II

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1926.503(a)(2)(ii):The correct procedures for erecting, maintaining, disassembling, and inspecting the fall protection systems to be used:  On or about January 14, 2026, employees performing carpentry work did not inspect the fall protection system prior to use, exposing employees to the hazards associated with not inspecting a horizontal lifeline.  Abatement documentation is required of this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.503 A01

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $3547.00 · Current $1775.00 Reduced
29 CFR  1926.503(a)(1):The employer shall provide a training program for each employee who might be exposed to fall hazards. The program shall enable each employee to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards.  On or about January 14, 2026, employees performing carpentry work at heights exceeding six feet were not trained to recognize and minimize fall hazards, exposing the employees to falls between 13-19 feet.  Abatement documentation is required of this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (2)
  • — I (S) $1775
  • — Z (S) $3547

WG, INC.

View WG, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348689829.