OSHA Inspection: REBCO INDUSTRIES LLC

Issued

2026-04-13 00:00:00

Abate by

2026-07-17 00:00:00

Penalty

Initial $8276.00 · Current $5000.00 Reduced

General-duty citation text

29 CFR  1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:  a)  Facility: The energy control procedures were not documented for machines including, but not limited to, Emmegi SCA-550 Single head cutting-off machines, on which servicing and/or maintenance was being performed by the employees under lock-out/tag-out program, on or about 02/06/2026.

Issued

2026-04-13 00:00:00

Abate by

2026-07-17 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.147(c)(6)(ii): The employer did not certify that periodic inspections of the energy control procedures had been performed:   a) Facility: The periodic inspections of the energy control procedures for machines including, but not limited to, Emmegi SCA-550 - Single head cutting-off machines, on which servicing and/or maintenance is being performed under lock-out/tag-out program, were not certified by the employer, on or about 02/06/2026.

Issued

2026-04-13 00:00:00

Penalty

Initial $4965.00 · Current $2000.00 Reduced

General-duty citation text

29 CFR  1910.157(c)(1): Portable fire extinguishers were not mounted, located and identified so that they were readily accessible without subjecting the employees to injuries:  a) Western side of Production Area  /building column next to the Emmegi cutting machine: The area marked to show the location for a fire extinguisher was missing a fire extinguisher, on or about 02/12/26.

Issued

2026-04-13 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.1200(f)(6)(ii): Except as provided in 29 CFR 1910.1200(f)(7) and 29 CFR 1910.1200(f)(8), the employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the product identifier and words, pictures, symbols, or combination thereof, which provide at least general information regarding the hazards of the chemicals and which, in conjunction with the other information immediately available to employees under the hazard communication program, would provide employees with the specific information regarding the physical and health hazards of the hazardous chemical:  a) Production Area: The employer did not ensure a label was placed on a 55-gallon drum with Zep Z-Green that would provide the necessary information including the product identifier and general information concerning the hazards of the chemical, on or about 02/12/2026.