OSHA Inspection: WESLEY & TED CORPORATION

Issued

2026-06-10

Abate by

2026-07-08

Penalty

Initial $3972 · Current $3000 Reduced

General-duty citation text

29 CFR  1926.451(b)(1): Each platform on all working levels of scaffolds shall be fully planked or decked between the front uprights and the guardrail supports as follows:  a) On or about April 22, 2026, the employer did not ensure that the scaffold system was fully planked when the employees were performing masonry work, exposing them to fall hazards of approximately 25 feet to the lower level.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

2026-06-10

Penalty

Initial $3972 · Current $0 Reduced

General-duty citation text

29 CFR  1926.451(e)(1): Safe access was not provided to scaffold platforms when the platforms were more than 2 feet above or below the point of access:  a) On or about April 22,2026, employees were climbing a tubular welded frame scaffold platform up to approximately 25 feet above the ground in order to access and egress the work area of a residential masonry work.  No abatement certification or documentation is required for this item.

Issued

2026-06-10

Abate by

2026-07-08

Penalty

Initial $3972 · Current $3000 Reduced

General-duty citation text

29 CFR 1926.451(g)(1):  Each employee on a scaffold more than 10 feet above a lower level was not protected from falling to that lower level:  a) On or about April 22, 2026, the employees of Wesley & Ted Corporation were exposed to fall hazards while conducting masonry work at an elevation greater than 25 feet from the ground.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.